Truck and commercial vehicle figurines
Pre-Coloured Driver Figure with Brown Hair (Approx. 1:16 Scale) for the AMEWI 1:12 Mercedes-Benz Unimog
Brown-Haired Driver Figure for the AMEWI Unimog licmas-tank adapted this seated driver figure specifically to fit the cab of the AMEWI 1:12 scale Mercedes-Benz Unimog. The figure itself is approximately 1:16 scale and fits both the Basic and Advanced versions. The brown-haired driver comes in full colour, ready to install without additional painting. Compatible AMEWI 1:12 Scale Unimog Models Unimog Basic 4WD RTR in Green (Item No. 22632) Unimog Basic 4WD RTR in Grey (Item No. 22631) Unimog Advanced 4WD RTR in Orange (Item No. 22630) Unimog Advanced 4WD RTR in Petrol (Item No. 22660) Product Details Figure item number: 10309 Figure scale: Approx. 1:16 Seated dimensions: 81 mm high × 39 mm wide × 55 mm deep Material and finish: 3D-printed in Germany from PLA, with additional painted details Package contents: One pre-coloured driver figure with brown hair in the seated pose shown. Vehicle not included. Fitting the Driver in the Cab If your model has a removable steering wheel, take it off and fit it into the driver's hands. Then install the driver and steering wheel together in the cab. This driver figure is an aftermarket accessory from licmas-tank. It is not an original AMEWI or Mercedes-Benz accessory.
Pre-Colored Driver Figure with Beard (Approx. 1:16 Scale) for the AMEWI 1:12 Mercedes-Benz Unimog
Bearded, Gray-Haired Driver Figure for the AMEWI Unimog licmas-tank adapted this seated driver figure specifically to fit the cab of the AMEWI 1:12 scale Mercedes-Benz Unimog. The figure itself is approximately 1:16 scale and fits both the Basic and Advanced models. It comes in full color and is ready to install without any additional painting. Compatible AMEWI 1:12 Scale Unimog Models Unimog Basic 4WD RTR in Green (Item No. 22632) Unimog Basic 4WD RTR in Gray (Item No. 22631) Unimog Advanced 4WD RTR in Orange (Item No. 22630) Unimog Advanced 4WD RTR in Petrol Blue (Item No. 22660) Product Details Figure item number: 10380 Figure scale: Approx. 1:16 Seated dimensions: 81 mm high × 39 mm wide × 55 mm deep Material and finish: 3D-printed in PLA in Germany and partially painted Package contents: One pre-colored bearded driver figure in the seated pose shown. Vehicle not included. Installing the Figure in the Cab If your model has a removable steering wheel, take it off and fit it into the driver's hands. Then install the figure and steering wheel together in the cab. This driver figure is an independent accessory made by licmas-tank. It is not an original AMEWI or Mercedes-Benz accessory.
Driver figure for model vehicles such as THW Trucks etc. Scale approx. 1:16 brown hair
Driver Figure for Model Vehicles of THW, Scale approx. 1:16This driver figure is designed for use in model vehicles for example THW vehicles in the scale of approx. 1:16. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA 3d printing and some parts are handpainted.Assembly Instruction The figure is designed for a seated position in the driver's cab, we recommend the following procedure:The steering wheel of the most models can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose (the vehicle is not included – photo is for illustrative purposes).
Driver figure for model vehicles THW such as Trucks etc. Scale approx. 1:16
Driver Figure for Model Vehicles of THW, Scale approx. 1:16This driver figure is designed for use in model vehicles of THW in the scale of approx. 1:16. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA 3d printing and some parts are handpainted.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly we recommend the following procedure:The steering wheel of the model can be mostly removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose (Vehicle not included – photo is for illustrative purposes).
Driver figure for model vehicles such as trucks, emergency medical services, fire department, etc. Scale approx. 1:16
Driver figure for model vehicles such as trucks, emergency medical services, fire department, etc. Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA 3d printing and some parts are handpainted.Assembly Instruction The figure is designed for a seated position in the driver's cab, we recommend the following procedure:The steering wheel of the most models can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x driver figure in the shown pose
US Army Driver Figure WWII 1:16 –unpainted- Compatible with AMEWI Willys MB Jeep 1:14
US Army Driver Figure WWII 1:16 –unpainted- Compatible with AMEWI Willys MB Jeep 1:14Detailed US driver figure unpainted from World War II in 1:16 scale.The figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The driver figure comes in a single color and unpainted, making it ideal for custom painting. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 44 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x driver figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
Driver figure for model vehicles, trucks, and commercial vehicles in 1:14 scale
Driver figure for model vehicles, trucks, and commercial vehicles in 1:14 scaleThis driver figure is designed for use in model vehicles in approx. 1:14 scale. Each figure is manufactured in Germany and printed in color as shown.Product DetailsScale: 1:14Dimensions: 61,5 mm (Height) x 45,2 mm (Width) x 50,5 mm (Depth)Manufacturing: Made in GermanyMaterial & Finish: Printed in PLA with partial hand-painted details.Scope of Delivery1x Driver figure (as shown)
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14Detailed US driver figure colored from World War II in 1:16 scale.The figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The driver figure comes pre-painted and is ready to be placed directly in the vehicle. No additional painting is required. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 44 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x driver figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14Detailed US driver figure colored from World War II in 1:16 scale.The figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The driver figure comes pre-painted and is ready to be placed directly in the vehicle. No additional painting is required. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 44 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x driver figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
Figurine Construction Worker with High-Vis Vest and Jackhammer 1/14 Lorry Truck Commercial Vehicles Model Making
Figurine Construction Worker with High-Vis Vest and Jackhammer 1/14 Lorry Truck Commercial Vehicles Model MakingScope of delivery: colored figure in a scale suitable for 1/14 - 1/16Dimensions: Height approx. 122 mmMaterial: PLAThe figure is delivered as shown.
Figure 1/14 of foreman with safety waistcoat and writing pad Truck Commercial vehicles Construction site Model making
Figure 1/14: Foreman with High-Visibility Vest and Notepad (colored) This figure can be used on a construction site as a foreman or on a truck as, for example, a loading supervisor. Contents: one colored figure in a scale suitable for 1/14–1/16 Dimensions: Height approx. 126 mm Material: PLA
US Army CO-Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14
US Army Co-Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14Detailed US Soldier figure colored from World War II in 1:16 scale.The Co-Driver figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The US Soldier WW2 Figure in Scale 1/16 comes pre-painted and is ready to be placed directly in the vehicle. No additional painting is required. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 40 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x Co-driver US Soldier figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
Driver figure for model vehicles such as Unimog, Truck, etc. Scale approx. 1:16, unpainted
Driver Figure for Model Vehicles Truck, Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly in the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of the model can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x unpainted driver figure (Unimog not included).
Driver or Passenger Figure Lkw with Coffee Cup and Full Beard for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure Lkw with Coffee Cup and Full Beard for Model Vehicles, Scale approx. 1:16This figure holding a coffee cup can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with Coffee Cup for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure Truck with Coffee Cup for Model Vehicles, Scale approx. 1:16This figure holding a coffee cup can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with Bottle for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure with Bottle for Model Vehicles, Truck, Scale approx. 1:16This figure holding a bottle in the hand be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with Newspaper and Full Beard for Model Vehicles, Trucks, Scale approx. 1:16
Driver or Passenger Figure with Newspaper and Full Beard for Model Vehicles, Scale approx. 1:16This figure holding a newspaper in the hands can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with hand gesture and Full Beard for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure with hand gesture and Full Beard for Model Vehicles, Trucks, Scale approx. 1:16This figure with upper hand gesture can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 100 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Figure 1/14 worker safety waistcoat broom resin truck commercial vehicles construction site model making
Figure construction worker with safety waistcoat and broom made of resin 1/14 Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Hight, about 115mm. Note: The figure is supplied with printed supports. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 Worker shovel safety waistcoat resin truck utility vehicles construction site model making
Figure construction worker with safety waistcoat and shovel made of resin 1/14 truck truck commercial vehicles modelling Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 120 mm Note: The figure is supplied with printed supports. Recommendation: The pressure struts (supports) can be removed with small pliers or a scalpel. Slight reworking of the figure is required in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 construction worker with safety waistcoat and shovel made of resin Truck Commercial vehicles Construction site Model making
Figure 1/14 construction worker with safety waistcoat and shovel made of resin Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 88 mm Note: The figure is supplied with printed supports. Other scales possible on request. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 of foreman with safety waistcoat and writing pad made of resin Truck Commercial vehicles Construction site Model making
Figure 1/14 foreman with safety waistcoat and writing board made of resin The figure can be used on a building site as a foreman or on a lorry as a loading foreman, for example. Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 125 mm Note: The figure is supplied with printed supports. Other scales possible on request. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 Worker jackhammer safety waistcoat Resin lorry truck commercial vehicles construction site model making
Figure construction worker with safety waistcoat and jackhammer made of resin 1/14 truck truck commercial vehicles modelling Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 122 mm Note: The figure is supplied with printed supports. Recommendation: The pressure struts (supports) can be removed with small pliers or a scalpel. Slight reworking of the figure is required in places after removal. Please wear a protective mask when working on resin figures.