1/16 vehicles
Schwimmwagen sprue B
Schwimmwagen sprue B Details/Scope of delivery: Injection molded part B of the Schwimmwagen
Schwimmwagen sprue C
Schwimmwagen sprue C Details/Scope of delivery: Injection molded part C of the Schwimmwagen
Schwimmwagen sprue A
Schwimmwagen sprue A Details/Scope of delivery: Injection molded part A of the Schwimmwagen
Schwimmwagen sprue D
Schwimmwagen sprue D Details/Scope of delivery: Injection molded part D of the Schwimmwagen
Pre-Coloured Driver Figure with Brown Hair (Approx. 1:16 Scale) for the AMEWI 1:12 Mercedes-Benz Unimog
Brown-Haired Driver Figure for the AMEWI Unimog licmas-tank adapted this seated driver figure specifically to fit the cab of the AMEWI 1:12 scale Mercedes-Benz Unimog. The figure itself is approximately 1:16 scale and fits both the Basic and Advanced versions. The brown-haired driver comes in full colour, ready to install without additional painting. Compatible AMEWI 1:12 Scale Unimog Models Unimog Basic 4WD RTR in Green (Item No. 22632) Unimog Basic 4WD RTR in Grey (Item No. 22631) Unimog Advanced 4WD RTR in Orange (Item No. 22630) Unimog Advanced 4WD RTR in Petrol (Item No. 22660) Product Details Figure item number: 10309 Figure scale: Approx. 1:16 Seated dimensions: 81 mm high × 39 mm wide × 55 mm deep Material and finish: 3D-printed in Germany from PLA, with additional painted details Package contents: One pre-coloured driver figure with brown hair in the seated pose shown. Vehicle not included. Fitting the Driver in the Cab If your model has a removable steering wheel, take it off and fit it into the driver's hands. Then install the driver and steering wheel together in the cab. This driver figure is an aftermarket accessory from licmas-tank. It is not an original AMEWI or Mercedes-Benz accessory.
Pre-Colored Driver Figure with Beard (Approx. 1:16 Scale) for the AMEWI 1:12 Mercedes-Benz Unimog
Bearded, Gray-Haired Driver Figure for the AMEWI Unimog licmas-tank adapted this seated driver figure specifically to fit the cab of the AMEWI 1:12 scale Mercedes-Benz Unimog. The figure itself is approximately 1:16 scale and fits both the Basic and Advanced models. It comes in full color and is ready to install without any additional painting. Compatible AMEWI 1:12 Scale Unimog Models Unimog Basic 4WD RTR in Green (Item No. 22632) Unimog Basic 4WD RTR in Gray (Item No. 22631) Unimog Advanced 4WD RTR in Orange (Item No. 22630) Unimog Advanced 4WD RTR in Petrol Blue (Item No. 22660) Product Details Figure item number: 10380 Figure scale: Approx. 1:16 Seated dimensions: 81 mm high × 39 mm wide × 55 mm deep Material and finish: 3D-printed in PLA in Germany and partially painted Package contents: One pre-colored bearded driver figure in the seated pose shown. Vehicle not included. Installing the Figure in the Cab If your model has a removable steering wheel, take it off and fit it into the driver's hands. Then install the figure and steering wheel together in the cab. This driver figure is an independent accessory made by licmas-tank. It is not an original AMEWI or Mercedes-Benz accessory.
Driver figure for model vehicles such as THW Trucks etc. Scale approx. 1:16 brown hair
Driver Figure for Model Vehicles of THW, Scale approx. 1:16This driver figure is designed for use in model vehicles for example THW vehicles in the scale of approx. 1:16. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA 3d printing and some parts are handpainted.Assembly Instruction The figure is designed for a seated position in the driver's cab, we recommend the following procedure:The steering wheel of the most models can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose (the vehicle is not included – photo is for illustrative purposes).
Driver figure for model vehicles THW such as Trucks etc. Scale approx. 1:16
Driver Figure for Model Vehicles of THW, Scale approx. 1:16This driver figure is designed for use in model vehicles of THW in the scale of approx. 1:16. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA 3d printing and some parts are handpainted.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly we recommend the following procedure:The steering wheel of the model can be mostly removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose (Vehicle not included – photo is for illustrative purposes).
Driver figure for model vehicles such as trucks, emergency medical services, fire department, etc. Scale approx. 1:16
Driver figure for model vehicles such as trucks, emergency medical services, fire department, etc. Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA 3d printing and some parts are handpainted.Assembly Instruction The figure is designed for a seated position in the driver's cab, we recommend the following procedure:The steering wheel of the most models can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x driver figure in the shown pose
US Army Driver Figure WWII 1:16 –unpainted- Compatible with AMEWI Willys MB Jeep 1:14
US Army Driver Figure WWII 1:16 –unpainted- Compatible with AMEWI Willys MB Jeep 1:14Detailed US driver figure unpainted from World War II in 1:16 scale.The figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The driver figure comes in a single color and unpainted, making it ideal for custom painting. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 44 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x driver figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14Detailed US driver figure colored from World War II in 1:16 scale.The figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The driver figure comes pre-painted and is ready to be placed directly in the vehicle. No additional painting is required. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 44 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x driver figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14
US Army Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14Detailed US driver figure colored from World War II in 1:16 scale.The figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The driver figure comes pre-painted and is ready to be placed directly in the vehicle. No additional painting is required. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 44 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x driver figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
US Army CO-Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14
US Army Co-Driver Figure WWII 1:16 –colored- Compatible with AMEWI Willys MB Jeep 1:14Detailed US Soldier figure colored from World War II in 1:16 scale.The Co-Driver figure was customized by licmas-tank specifically for the AMEWI Willys MB Scale Crawler 4WD Jeep in 1:14 scale (Item No. 22737, 22738).With its customized seating position, the figure is ideal for use with this RC military vehicle. The US Soldier WW2 Figure in Scale 1/16 comes pre-painted and is ready to be placed directly in the vehicle. No additional painting is required. Product DetailsScale: approx. 1:16Dimensions: 80 mm (height) x 40 mm (width) x 69 mm (depth)Production: Made in Germany.Characteristics: The Figure is made of PLA.Scope of Delivery: 1x Co-driver US Soldier figure in the shown pose Note: This is a standalone accessory product from licmas-tank; it is not an original accessory from AMEWI or the Willys brand owner. The vehicle is not included and is for illustration purposes only.
Driver figure for model vehicles such as Unimog, Truck, etc. Scale approx. 1:16, unpainted
Driver Figure for Model Vehicles Truck, Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly in the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of the model can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x unpainted driver figure (Unimog not included).
Driver or Passenger Figure Lkw with Coffee Cup and Full Beard for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure Lkw with Coffee Cup and Full Beard for Model Vehicles, Scale approx. 1:16This figure holding a coffee cup can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with Coffee Cup for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure Truck with Coffee Cup for Model Vehicles, Scale approx. 1:16This figure holding a coffee cup can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with Bottle for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure with Bottle for Model Vehicles, Truck, Scale approx. 1:16This figure holding a bottle in the hand be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with Newspaper and Full Beard for Model Vehicles, Trucks, Scale approx. 1:16
Driver or Passenger Figure with Newspaper and Full Beard for Model Vehicles, Scale approx. 1:16This figure holding a newspaper in the hands can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with hand gesture and Full Beard for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure with hand gesture and Full Beard for Model Vehicles, Trucks, Scale approx. 1:16This figure with upper hand gesture can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 100 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver figure Truck for model vehicles such as Scania, Unimog, etc. Scale approx. 1:16 – 1:18
Driver Figure Truck for Model Vehicles, Scale approx. 1:16 – 1:18This driver figure (without lower legs) is designed for use in model vehicles like a truck in the scale of approx. 1:16 – 1:18, such as the Amewi Scania Truck 770 or the Mercedes-Benz Unimog from Amewi. Each figure is manufactured in Germany and features a base paint job as shown.Product DetailsScale: approx. 1:16 – 1:18Dimensions: 55 mm (height) x 39 mm (width) x 44.6 mm (depth)Production: Made in Germany.Characteristics: Each figure is a hand-painted unique piece. The paint job represents a base finish.Product Note As each figure is painted individually by hand, there may be slight variations in appearance compared to the product photos. The figure is designed for a seated position in the driver's cab and has no legs.Assembly Instruction The figure is designed for a seated position in the driver's cab. Since it has no lower legs, it fits more easily into various models. For easy assembly in the Amewi Scania Tractor 770 (Item No. 22717, 22762, 22770) as well as the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of these models can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose without lower legs (Unimog and truck not included).
Driver figure for model vehicles such as Unimog, etc. Scale approx. 1:16
Driver Figure for Model Vehicles, Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany and features a base paint job as shown.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: Each figure is a hand-painted unique piece of resin. The paint job represents a base finish.Product Note As each figure is painted individually by hand, there may be slight variations in appearance compared to the product photos. The figure is designed for a seated position in the driver's cab.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly in the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of the model can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose (Unimog not included).
Amewi V-Guard armored vehicle 6WD 1:16 RTR, olive green
Amewi V-Guard armored vehicle 6WD 1:16 RTR, olive green. This 1:16 scale replica of an armored troop carrier used by the military or even the police impresses with its robust construction, six-wheel drive (6WD) and a relatively high top speed of up to 20km/h. Thanks to non-slip rubber tires, high traction is ensured at all times. The V-Guard overcomes inclines of up to 60 degrees effortlessly. As with the chain drive, the three wheels on one side of the vehicle are driven simultaneously, so the model can even turn on the spot by steering in opposite directions. The driving functions forward, backward, left, right, and turning on the spot can be controlled proportionally. A large storage space, for example, for transporting game pieces, contraband or the like, is revealed when the tailgate is opened by hand. Two bright LEDs at the front provide optimal illumination of the operational area. The modern, interference-free 2.4GHz remote control with fold-out handles in gamepad look provides a stable grip. A special feature is that the maximum achievable speed can be throttled down as desired via a small gear wheel on the transmitter. Available as an RTR (Ready-to-Run) version, everything needed to operate the model is already included in the scope of delivery - except for household batteries for the remote control. The included Li-Ion battery allows long driving time of up to 30 minutes depending on driving style and route profile. Thanks to USB charging cable, the troop carrier can be quickly made ready to drive again for the next mission. Highlights: 6WD (six-wheel) drive: model climbs inclines of up to 60 degrees Proportional steering: High maneuverability in the field provides even more driving fun Large Li-Ion battery: Depending on driving style and route profile, driving times of up to 30min are possible Other features: Scale optics 2.4GHz remote control with speed setting option LED lighting in front Large lockable cargo area Six rubber tires for high traction Technical data: Scale: 1:16 Length: 280mm Width: 130mm Height: 120mm Weight incl. battery: 728g Main material: plastic Wheelbase 160mm Li-Ion battery 7,4V 1.500mAh, Mini-Tamiya connector, 70x36x22, 82g Driving time: up to 30min Top speed: about 20km/h Remote control: 2,4GHz Range: approx. 30m Charger: USB cable Charging time: approx. 180min Scope of delivery: Model Remote control 2,4GHz Battery USB charging cable Instruction manual DE/EN/FR/IT Required accessories: 2x AA 1.5 V batteries for the remote control Note: The remote control is in the delivery state in the transport box of the vehicle.
Remote control M16, Maxx Pro, M-ATV
Remote control suitable for the M16 half-track vehicle, Maxx Pro MRAP and M-ATV MRAP Details/Scope of delivery: 1x remote control Warnings Use under direct adult supervision Minimum age: 14 years Not suitable for children under 36 months. Choking hazard due to small parts that may be swallowed.
Light module with LEDs
Light module with LEDs Scale lighting set for the following models: 22417, 22418, 22420 The set consists of all the LEDs required for the vehicle, including connection cable and control electronics.