RC Hydraulic Wheel Loader G921H Full Metal 1:16 RTR White
Hydraulic scale replica of a well-known wheel loader in full metal and white paint, which provides an exceptional driving experience with lockable differentials, 2-speed manual gearbox and oscillating axle. This approx. 11kg construction machine in 1:16 scale can be moved on almost any surface thanks to its solid rubber tyres. The power of the boom, the brushless drive and the hydraulically controlled bucket are above average in comparison to its own weight and enable trouble-free working even with heavy material such as earth, gravel or other bulk material.
The heart of the hydraulic control system is a brushless high-performance pump with overflow valve and a flow rate of approx. 400ml/min. In addition, the system is equipped with 3-way change-over valves and an air-oil cooler. The wheel loader is controlled via a high-quality proportional 2.4GHz remote control. A total of ten functions can be operated. With bright LED headlights at the front and rear, nothing stands in the way of use even at dusk and in the dark at night.
In addition to the above-mentioned features, the bodywork, the interior and the axle joints provide the real scale factor. Almost every detail has been scaled down.
The overall power, speed and manoeuvrability of this model is significantly higher than that of wheel loaders with e.g. electric spindle drives - thus closing the gap between entry-level models and functional modelling. The G921H is wonderfully suited as a transition from our electric 1:14 wheel loaders to the upper class.
Hydraulic quick articulated steering: for maximum manoeuvrability on any terrain
Differentials that can be locked via the remote control: give the model maximum driving power in difficult terrain
2-speed gearbox shiftable from the transmitter: For different speeds and perfect power transmission off-road
Further features:
Full metal model with very high dead weight
High-quality brushless motors for drive and hydraulic pump
Gearbox with hardened steel gears
Hydraulic cylinder with welded screw-on block for high tightness
Easy access to electronics and battery through a large maintenance hatch at the rear
Solid rubber tyres for good traction on any terrain
4WD all-wheel drive
LED lighting
Large 7500mAh 7.4V battery included
220V plug-in charger included
Stylish 16-channel 2.4Ghz transmitter included
Model ready bound and set up, just fill up with oil before first launch
Hydraulic oil included
Technical data:
Scale: 1:16
Length: 575mm
width: 180mm
Height: 210mm
Weight: approx. 11kg
Wheelbase: 221mm
Track width front: 182mm
Track width rear: 185mm
Ground clearance: 34mm
Front wheels: outside diameter/width 105/38mm
Rear wheels: outside diameter/width 105/38mm
Rim diameter: 56mm
Gearbox: 2-speed metal gearbox
Brake: electronic
Controller: Brushless
motors: Brushless
Drive system: Cardan
Steering: Hydraulic
Main material: Metal
Battery compartment dimensions: 72 x 36 x 52mm
Battery: Li-Ion, 2S, 7,4V, 7500mAh 15C, Softcase, XT30 connector LxWxH: 65x55x35mm, 284g
Riding time: approx. 30-45min, depending on use and terrain
Top speed: approx. 9 km/h in second gear
Remote control: 16 channels 2,4GHz
Range: approx. 150m
Charger: 220V plug-in charger for 2 and 3S batteries with balancer connection and 1.5A output
Charging time: approx. 3-4 hours depending on battery status
Scope of delivery:
Model
Transmitter
Battery
Charger
Hydraulic oil
Filling bottle
Binding plug
Operating instructions DE/EN
Required accessories:
4x 1.5V Mignon AA batteries for the transmitter
Product reviews can only be submitted by registered customers. Every rating is checked by us. Rated products were also purchased by the customers displayed.
Unfortunately there are no review yet. Be the first who rate this product.
