commercial vehicles
Figure 1/14 worker safety waistcoat broom resin truck commercial vehicles construction site model making
Figure construction worker with safety waistcoat and broom made of resin 1/14 Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Hight, about 115mm. Note: The figure is supplied with printed supports. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 Worker shovel safety waistcoat resin truck utility vehicles construction site model making
Figure construction worker with safety waistcoat and shovel made of resin 1/14 truck truck commercial vehicles modelling Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 120 mm Note: The figure is supplied with printed supports. Recommendation: The pressure struts (supports) can be removed with small pliers or a scalpel. Slight reworking of the figure is required in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 construction worker with safety waistcoat and shovel made of resin Truck Commercial vehicles Construction site Model making
Figure 1/14 construction worker with safety waistcoat and shovel made of resin Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 88 mm Note: The figure is supplied with printed supports. Other scales possible on request. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 of foreman with safety waistcoat and writing pad made of resin Truck Commercial vehicles Construction site Model making
Figure 1/14 foreman with safety waistcoat and writing board made of resin The figure can be used on a building site as a foreman or on a lorry as a loading foreman, for example. Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 125 mm Note: The figure is supplied with printed supports. Other scales possible on request. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 Worker jackhammer safety waistcoat Resin lorry truck commercial vehicles construction site model making
Figure construction worker with safety waistcoat and jackhammer made of resin 1/14 truck truck commercial vehicles modelling Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 122 mm Note: The figure is supplied with printed supports. Recommendation: The pressure struts (supports) can be removed with small pliers or a scalpel. Slight reworking of the figure is required in places after removal. Please wear a protective mask when working on resin figures.
Electronic quick change system for excavators 1:14 CNC aluminum
Electronic quick change system for excavators 1:14 CNC aluminum Electronic quick-change system makes it easy to change the shovels for the excavators on a scale of 1:14. No more screws required, the systems can now be exchanged at lightning speed at the push of a button. The quick coupler fits the following AMEWI models 22307 22308 22309 22344 22403 22415. CNC-milled aluminum black anodized. scope of delivery
RC truck Mercedes-Benz Arocs license truck tipper 2.4GHz RTR red
RC truck Mercedes-Benz Arocs license truck tipper 2.4GHz RTR red Great original Mercedes-Benz scale model of an Arocs tipper. Arocs is the name of the famous Mercedes-Benz truck series from Daimler AG. The Arocs construction site vehicles were first presented in 2013 and have since been found on many construction sites around the world. They are characterized by high performance, reliability and robustness. With this licensed model, almost all functions can be controlled as with its big brother, making the hearts of scaler fans beat faster. The model has a 4WD drive and an encapsulated gearbox, which means that it is protected from splash water and is therefore suitable for off-road use. The structure and paintwork of this high-quality model correspond to the original, which makes this model special in terms of design and presentation. The model is delivered RTR (ready to run) and the scope of delivery includes everything that is required for operation. (except the batteries for the transmitter) Features Original licensed Mercedes-Benz model, 10 channels controllable 2.4GHz system (fail-safe) Functions: forwards / backwards / right left, sound on / off, light, trough can be controlled separately long driving time (up to 20 min.) Battery included (Ni-MH 7.2V 400mAh) Charger included Transmitter included True-to-original simulation of all functions Technical specifications: Length: 422mm Width: 152mm Height: 181mm Weight: 2600g Driving time up to 20 minutes (depending on driving style) Charging time approx. 1.5 hours Range: approx. 30m USB charging cable Battery: 7.2V 400mAh Ni-Mh BEC connector Scope of delivery: Arocs tipper model 2.4Ghz transmitter Battery 7.2V 400mAh Ni-Mh USB charger Instructions: Deu / Eng / Ita / Fra Required accessories 4x AA Mignon battery for transmitter 1.5V suitable from 8 years
RC Mercedes-Benz Arocs fire brigade fire engine 1:18 RTR
RC Mercedes-Benz Arocs fire brigade fire engine 1:18 RTR Exclusive license model of a Mercedes AROCS fire brigade fire engine on a scale of 1:18. This beautiful replica of the German fire brigade impresses with its attention to detail, the fully proportional driving functions, the sound (siren, motor) and the LED lighting. The water cannon with spray function (sprays approx. One meter), can be rotated 360 ° and adjusted in height. All these functions, including the trimming of the steering, can be operated using the 2.4 GHz transmitter supplied in elegant black / red with aluminum sticks. The range is approx. 30 - 50m. The powerful 2WD rear wheel drive with the rubber tires ensures sufficient traction to get to difficult places. The supplied 1200mAh Li-Ion battery ensures a driving time of approx. 10 - 15 minutes depending on the surface and use (with light / sound, water spray module, etc.). The battery can be removed and with optional spare batteries a long game fun is guaranteed. A USB charging cable is included for charging the battery, which can be connected to a PC, laptop or smartphone power supply unit. All add-on parts and applications are very detailed and correspond to the original vehicle. The delivery takes place in a high-quality black cardboard box with Mercedes imprint and hologram with the serial number of Daimler AG. Features: Very high level of detail Official Mercedes exclusive license German fire brigade vehicle (lettering and sound) 2.4GHz system with 12 controllable channels High quality transmitter with aluminum sticks Detailed interior Transparent panes for a view of the driver's cab Large battery (1200mAh Li-Ion 7.4V) Fully proportional controllable Profiled rubber tires 2WD rear wheel drive Technical specifications: Length: 480mm Width: 150 Height: 220mm Weight: 2398g including battery System: 2.4GHz / 12 channel Battery: Li-Ion 7.4V 1200mAh BEC connection LxWxH 70 x 36.5 x 18.5mm, weight 77g Charger: USB charging cable balancer 0.8A output Scope of delivery: Model fire engine 2.4Ghz transmitter Battery Li-Ion 7.4V 1200mAh USB charging cable Transmitter stick aluminum Instructions DE / EN / IT / FR Required accessories: 4x Mignon 1.5V AA batteries
RC Truck Mercedes-Benz Arocs Licence Crane Truck with Tipper RTR green
RC Truck Mercedes-Benz Arocs Licence Crane Truck with Tipper RTR green Licensed Mercedes-Benz Arocs vehicle with crane superstructure and tipping function, which complements our other licensed models from the Arocs tipper series (itself on a scale of 1:14) and impresses not only visually with its special paintwork, but also with its range of functions. All driving functions and various functions of the crane superstructure (except for turning and opening/closing the grab) can be controlled fully proportionally. In addition, a scrap grapple is included in the set, which allows even more variety in use and guarantees variety. Both grabs, wood grab and scrap grab, can be exchanged within a short time. The vehicle has LED lighting at the front and rear, indicators at the front and rear and two yellow warning lights on the roof, so that work can be done in style even at dusk. In addition, a sound module is installed in the model, which realistically reproduces the driving functions, including a reversing warning sound! All sides of the tipping trough can be opened, e.g. to transport longer logs. The set is rounded off by the scope of delivery with battery (7.4V LiIon 1200mAh), charger, high-quality 2.4GHz transmitter and assembly tool incl. screw for the additional scrap grapple. Highlights: Electric scrap grapple: Even more variety in use possible Exclusive special paint finish: in green to match forestry work, a real eye-catcher Fully functional crane body: Ready mounted on the vehicle, can be used immediately Further features: RTR version (Ready-to-Run) Fully proportional driving functions Various functions of the crane can be controlled proportionally (up/down: main arm and jib) Li-Ion 7.4V 1200mAh battery for long driving times of up to 20 minutes High-quality 2.4Ghz transmitter with a total of 16 control functions Additional accessories included (tool for mounting, screw for mounting) Powerful drive and protective gear on the grabber (jumps over if the load is too high) Rubber tyres 4WD drive Technical data: Scale: 1:14 Length: 490mm width: 155mm Height: min. 300mm Weight: approx. 2450g Wheelbase: 260mm (first to last axle) Track width front: 120mm Track width rear: 120mm Ground clearance: approx. 18mm Front wheels: Outer diameter/width 65 / 20mm Rear wheels: Outer diameter/width 65 / 25mm Rim diameter: 37mm Gearbox: plastic Brake: electronic Controller: All-in-one unit Motor: Brushed Main material: plastic Battery compartment: 85x50x33mm Battery: Li-Ion, 2S 7,4V 1200mAh, round cells type 13650, BEC connector, 70x35x20mm, 73g Driving time: up to 20min Top speed: approx. 8-10km/h Remote control: 16 channels, 2,4GHz, autobinding Range: approx. 60-80m Charger: USB Charging time: 100-120min Scope of delivery: Model Remote control Battery Charging cable Screwdriver Screw Scrap grapple Operating instructions DE/EN/FR/IT Required accessories: 4x 1.5V AA batteries for the remote control
RC truck Mercedes-Benz Arocs truck tipper PRO metal 2.4GHz RTR white
RC truck Mercedes-Benz Arocs truck tipper PRO metal 2.4GHz RTR white Great scale model of a Mercedes Arocs tipper in exclusive white paintwork to match our full metal excavators and wheel loaders. (22415/22416) Arocs is the name of the famous Mercedes-Benz truck series from Daimler AG. The Arocs construction site vehicles were first presented in 2013 and have since been found on many construction sites around the world. They are characterized by high performance, reliability and robustness. With this licensed model, almost all functions can be controlled as with its big brother. The model has a 4WD drive, an encapsulated gearbox and fully proportional control. It is splash-proof and therefore fully suitable for off-road use. The structure and paintwork of this high-quality model in full metal construction correspond to the original and that makes this model unique in design and function. The model is delivered to RTR and the scope of delivery includes everything that is required for operation. (except the batteries for the transmitter) Features: high quality paintwork in white 10 channels controllable 2.4GHz system (fail-safe) Functions: forward / backward / right / left, sound on / off, light, trough can be controlled separately long driving time (up to 30 min.) Battery included (Li-Ion 2000mAh 7.4V) The battery is also used in excavators and wheel loaders Charger included (Li-Ion / USB) Transmitter included (black / rubberized) True to the original simulation of all functions Construction in full metal including cabin extension Fully proportional controls Exclusive licensed product from Amewi Technical specifications: Length: 450mm Width: 147mm Height: 187mm Weight: 3212g Steering: proportional Gas: proportional Tilting device: proportional Payload up to 3.5kg Transmission: 2.4GHz Scope of delivery: Model Mercedes AROCS license 2.4GHz transmitter Battery 2000mAh Li-Ion 7.4V USB charging cable Instructions in German / English Required accessories: 4x AA Mignon battery for transmitter 1.5V suitable from 8 years
RC wheel loader G483E white 1:14 partial metal RTR sound and light 10-channel 2.4 GHz
RC wheel loader G483E white 1:14 partial metal RTR sound and light 10-channel 2.4 GHz Wheel loader 1:14, RTR, 10-channel V3 Wheel loader in 1:14 scale / partial metal scale This high-quality wheel loader closes the gap between RC toys and professional model making. The boom, the 190mm wide shovel and parts of the superstructure are made of real metal. The pulpit was made of impact-resistant plastic. The optical and technical equipment of this 1:14 model does not only convince experienced model builders. The articulated joint of the wheel loader can be controlled very precisely and sensitively. The functions up / down, shovel open / close are proportional. Precise work with this high-quality model is therefore no problem. The actuating force of the 2 spindle drives is more than sufficient to have no problems even with larger loads. Features: Sound can be switched on / off 10 controllable channels 2.4GHz control 10 channel Long driving time RTR version including battery / charger Rubber tires Powerful drives Technical specifications: Length: 540mm Width: 200mm Height: 210mm Weight: approx. 4.8kg Bucket: 190mm Brush motor / drive Spindle drives / shovel + arm Battery 2000mAh Li-Ion, 7.4V XT30 Scope of delivery: Wheel loader 1:14 partial metal Battery 2000mAh Li-Ion 7.4V charger Transmitter 10 channel 2.4GHz Instructions DE / EN
RC wheel loader G484E 1:14, RTR 10-channel sound, light, part metal
Wheel Loader 1:14, RTR, 10-Channel – The best-seller in the V4 version New features in the V4 version: Fully proportional control for throttle, steering and bucket. Significantly faster and more precise articulated joint for steering. Lighting: White LED headlights at the front, red rear lights. High-quality metal transmitter sticks for a better control feel. Optimized electronics for higher performance and reliability. A premium model for beginners and professionals: the wheel loader in 1:14 scale offers the perfect combination of fun and sophisticated model making. With its partly metallic construction, a robust bucket width of 190 mm and a powerful drive, this model stands out from the crowd. The cabin is made of impact-resistant plastic, which guarantees stability and durability. Thanks to the proportionally controllable functions, including the bucket and arm movements as well as the gas and steering control, this wheel loader enables precise work – ideal for realistic operations. The new electronics of the V4 version offer increased overall performance, while the two powerful spindle drives can lift heavy loads with ease. Technical highlights: Control: 10-channel 2.4 GHz with sound that can be switched on and off. Drive: brush motor with long driving time. RTR (Ready-to-Run): delivery includes battery and charger. Robust rubber tires for a secure grip on a variety of surfaces. Technical data: Length: 540 mm Width: 200 mm Height: 210 mm Weight: approx. 4.8 kg Battery: 2000 mAh Li-Ion, 7.4 V with XT30 connector Shovel width: 190 mm Contents: Wheel loader 1:14 (partially metal) 2000 mAh Li-Ion battery (7.4 V) Charger 10-channel 2.4 GHz transmitter Operating instructions (German/English) Recommended age: 14 years and up Experience realistic model making at its most perfect – with the 1:14 V4 wheel loader. [TAB:Sicherheitshinweise RC Modelle]Sicherheitshinweise RC Modelle
RC truck Mercedes-Benz Arocs truck tipper PRO metal 2.4GHz RTR grey
RC truck Mercedes-Benz Arocs truck tipper PRO metal 2.4GHz RTR grey Great scale model of a Mercedes Arocs tipper in exclusive white paintwork to match our full metal excavators and wheel loaders. (22415/22416) Arocs is the name of the famous Mercedes-Benz truck series from Daimler AG. The Arocs construction site vehicles were first presented in 2013 and have since been found on many construction sites around the world. They are characterized by high performance, reliability and robustness. With this licensed model, almost all functions can be controlled as with its big brother. The model in the new version has a 4WD drive, an encapsulated gearbox and fully proportional control with improved steering. It is splash-proof and therefore fully suitable for off-road use. The structure and paintwork of this high-quality model in full metal construction correspond to the original and that makes this model unique in design and function. This truck is equipped with softer tires for better grip. The model is delivered to RTR and the scope of delivery includes everything that is required for operation. (except for the batteries for the transmitter). New in version 2: Improved steering with a new servo Softer tires for better grip Incl. 2nd battery Features: High quality paint in dark gray 10 controllable channels 2.4GHz system (interference-free) Driving functions: forward, backward, right, left Special functions: trough up / down, sound on / off, light on / off Payload up to 3.5kg Long travel times, up to 30 minutes Including two LiIon 2000mAh drive batteries Incl. USB LiIon charger True to the original simulation of all functions Structure in metal (cabin and trough) Fully proportional control Exclusive licensed product Technical specifications: Length: 450mm Width: 147mm Height: 187mm Weight: 3212g Transmission: 2.4GHz Battery: LiIon 7.4V 2S 2000mAh Scope of delivery: Mercedes-Benz AROCS license model Transmitter: 2.4GHz 2x battery USB charging cable Instructions in German / English Required accessories: 4x AA Mignon batteries for the transmitter
RC wheel loader G484E SE petrol 1:14 partial metal RTR 2.4 GHz
The G485E SE RC wheel loader – powerful, precise and impressive in its execution The fifth generation wheel loader – now with an extended arm Experience the perfect combination of RC toys and professional model making with this high-quality wheel loader in 1:14 scale. This model impresses with its detailed appearance and outstanding technology, which will delight both hobbyists and experienced model makers. The boom, the 190 mm wide bucket and parts of the structure are made of sturdy metal, while the driver's cab is made of impact-resistant plastic. New in this generation: the arm has been extended by approx. 10 mm to allow a greater reach. In addition, the problem of the bucket “folding over” in the rear position has been completely eliminated. Thanks to the proportional articulated joint and precise control of functions such as up/down, bucket open/close and throttle, even demanding jobs can be carried out with ease. The powerful spindle drives can easily handle even larger loads. Highlights: Proportional control for precise movements on all channels Switchable functions such as sound and rotating beacon 10 controllable channels for comprehensive control Powerful drives and 4WD for reliable operation Long driving time of up to 20 minutes, depending on use RTR version including battery and charger for immediate start Technical data: Scale: 1:14 Length: 540 mm, width: 200 mm, height: 210 mm Weight: 4800 g (incl. battery) Ground clearance: 30 mm Maximum speed: approx. 5 km/h Battery: Li-Ion 2S 7.4V 2000mAh, soft case with XT30 plug Charging time: approx. 2 hours, driving time: up to 20 minutes Remote control: 10-channel 2.4 GHz, range approx. 100 m Contents: wheel loader model remote control rechargeable battery USB charging cable operating instructions (German/English) Required accessories: 4 AA batteries for the transmitter Expand your collection with this impressive wheel loader that takes power and precision to a new level. Ideal for ambitious model builders and real RC enthusiasts! [TAB:Sicherheitshinweise RC Modelle]Sicherheitshinweise RC Modelle
RC Wheel Loader G485 AE White 1:14 – Partially Metal RTR with Sound and Light, 10-Channel
RC Wheel Loader G485 AE White 1:14 – Partially Metal RTR with Sound and Light, 10-Channel Description The Amewi wheel loader G485 AE in its fifth generation is the perfect choice for model building enthusiasts and RC fans. This model closes the gap between RC toys and professional model building. The instantaneous, proportional control comfort in combination with a robust construction made of metal and impact-resistant plastic makes it a real highlight in the 1:14 scale. The extended arm (10 mm more range) and the optimized bucket design enable precise work and improved ejection. With 10 controllable channels, powerful drives and a 4WD drive system, the wheel loader offers power and flexibility to handle even larger loads with ease. Features Proportional control: precise control on all channels Switchable sound and light effects: Includes rotating beacon 10 controllable channels: Versatile application options Robust construction: Metal boom, 190 mm wide bucket, impact-resistant plastic Powerful drives: For smooth operation and larger loads 4WD drive: For maximum off-road capability RTR (Ready-to-Run): Includes battery and charger Long driving time: Up to 20 minutes depending on the surface Technical data Scale: 1:14 Dimensions: Length: 540 mm Width: 200 mm Height: 210 mm Wheelbase: 223 mm Track width (front/rear): 160 mm Ground clearance: 30 mm Weight: 4800 g (incl. battery) Wheels: Outer diameter/width: 110 mm / 40 mm Rim diameter: 60 mm Material: Plastic / metal Drive system: Spindles for the boom Gear system: Multi-stage POM gear system Motor: 2x brushed for the wheels Battery: Li-Ion 2S 7.4V 2000mAh 20C soft case, XT30 plug Dimensions: 69 x 37 x 18 mm Weight: 93 g Maximum speed: Approx. 5 km/h Remote control: 10-channel 2.4 GHz Range: Approx. 100 m Driving time: Up to 20 minutes depending on driving style Charger: USB charging cable with balancer connection Charging time: Approx. 2 hours Scope of delivery RC wheel loader G485 AE 10-channel remote control Li-Ion battery (7.4V, 2000mAh) USB charging cable Operating instructions (DE/EN) Required accessories 4x AA Mignon batteries for the remote control Why buy the G485 AE wheel loader from licmas-tank? This model combines realistic functions, robust construction and precise control. With its detailed design, extended range and high functionality, the G485 AE wheel loader is an indispensable RC model for fans of construction and technology. licmas-tank stands for high-quality models and first-class service. [TAB:Sicherheitshinweise RC Modelle]Sicherheitshinweise RC Modelle
RC wheel loader G485E ME military 1:14, part metal, 10-channel, RTR
RC wheel loader G485E ME military 1:14, part metal, 10-channel, RTR Description: The exclusive G485E ME Military wheel loader in 1:14 scale impresses visually with its special paint job in Nato olive green and the switchable rotating beacon. Thanks to improved electronics, this construction machine meets a wide range of requirements - in addition, a self-constructed quick hitch and a pallet fork are each included in the scope of delivery made of metal. So there are hardly any limits to the variety of applications. Changes compared to the predecessor: - Proportional control bucket - Proportional control gas - Mechanical quick coupler - Pallet fork and bucket included - Faster steering - Rotating beacon yellow - Front light white, rear light red - Metal transmitter stick - New V4 electronics (improved) All in all, the G485E ME wheel loader closes the gap between RC toys and professional model building thanks to its visual and technical features. The boom, the approximately 190mm wide bucket and parts of the superstructure are made of real metal. The canopy is made of impact-resistant plastic. The articulated joint is proportional and thus allows sensitive control. The functions up/down, bucket up/down and throttle are also proportional. Precise work with this high-quality model is therefore no problem at all. With the actuating power of the two spindle drives, even larger loads can be mastered. The Li-Ion battery 2S 7.4V 2000mAh allows operating times of approx. 15 to 20 minutes, depending on the surface and load. Available as RTR version (Ready-to-Run), the scope of delivery already includes everything needed to operate the model - except for household batteries for the remote control. By means of a USB charging cable with balancer output, the wheel loader is quickly ready to drive again after extensive use. Highlights: Equipment also for experienced modellers: mechanical quick coupler, bucket and pallet fork each made of metal included in the set Switchable rotating beacon ready mounted: Visually impressive, even in the twilight Special paint finish in Nato olive green: Exclusive special model Further features: RTR version incl. battery and charger Proportional control on all channels Sound can be switched on / off 10 controllable channels 2.4GHz remote control 10-channel Long driving time; same battery type used as in Arcos tippers and full metal excavators from the Amewi Pro series Rubber tyres Powerful drives 4WD drive Technical data: Scale: 1:14 Length: 540mm Width: 200mm Height: 210mm Bucket: approx. 190mm wide Weight: approx. 4,8kg Main material: metal/plastic Brush motor / drive Spindle drives: shovel and arm Battery: Li-Ion 2S 7,4V 2000mAh, 69x37x18mm, 93g, XT30 plug (connector) Driving time: approx. 15-20min, depending on surface and load Remote control: 2,4GHz, 10 channels Range: approx. 150m Charger: USB cable / balancer output Charging time: approx. 2h Scope of delivery: Model Battery Charger Remote control Operating instructions DE/EN Required accessories: 4x AA batteries for the remote control
RC Excavator G451E Part Metal 1:14 RTR white
RC Excavator G451E Part Metal 1:14 RTR white This part-metal excavator in 1:14 scale leaves almost nothing to be desired. The arm, the shovel, the entire superstructure and each chain can be controlled separately. The model also has a sound module and the tower can be rotated 360°. This high-quality manufactured and true-to-scale model of a track excavator closes the gap between toys and our 1:14 full metal excavator and can definitely be counted as a functional model. A total of 23 channels can be controlled on the model. Thus, the model is in no way inferior to the original. The off-road capability in connection with the splash-proof electronics ensure unadulterated fun and a long durability of the individual of the individual components. In addition, the excavator comes with a wood grapple, an electric hammer drill and a shot grapple. This means that the model can be converted and adapted to current needs in just a few steps. The bucket is made of metal and has a large capacity. The drive chains are made of metal and the model also has powerful servomotors that can handle heavy loads without any problems. The quality and detail of this model are perfectly matched as an RTR model in this size. Furthermore, the spindle drives from the high-quality full-metal excavators with limit switches were installed in this model. The advantage of this drive system in conjunction with the metal tracks is the large + in weight and the associated power of the boom. This means that even solid material can be moved without any problems. The model is delivered in a very stable and beautifully shaped foamed box with individual compartments for all included components. Features: Very beautiful white paint Impact protection grille on the driver's cab Large metal shovel Euro control like a real excavator Sound module 7,4V LiIon battery 2000mAh included Technical data: Scale: 1:14 length: 330mm Width: 185mm Height: 175mm (without outriggers) Dimensions with fully extended outriggers: 670x185x450mm Weight (incl. battery): 4514g Drive: Chain drive motors: Brushed Drive main boom: Gear metal helical gears Outrigger drive: spindles with brushed motors and limit switches Remote control: 2,4GHz, Eurocontrol Range: 80m Battery: Li-Ion 2S 7,4V 2000mAh, XT30 connector, 69x37x19mm, 98g Balancer: XH Balancer Operating time: 15-20min Top speed: 5km/h Charger: USB charging cable 800mAh x 2 output Charging time: 60min Scope of delivery: Excavator Transmitter USB charging cable Battery Scrap grapple Wood grapple Shovel Hammer drill Tool for changing the attachments Instructions DE/EN/IT/FR Required accessories: Transmitter battery: 3 x 1.5V AA Mignon
RC excavator full metal 1:14 white 2.4GHz
RC excavator full metal 1:14 white 2.4GHz This full metal excavator on a scale of 1:14 as an exclusive Amewi Edition leaves almost nothing to be desired. The arm, the shovel, the entire structure and each chain can be controlled separately. The model also has a sound and smoke generator. The tower can be rotated 360 ° endlessly. This high-quality processed and true-to-scale model of a chain excavator closes the gap between toys and high-end functional model making. A total of 23 channels can be controlled with the full metal excavator. Thus, the model is in no way inferior to the original. The off-road capability in connection with the splash-proof electronics ensure untroubled fun and long durability of the individual components. In addition, the excavator comes with a wood grab, a hammer drill and a second, smaller shovel made of metal. This means that the model can be converted in a few simple steps. All gear parts are made of metal and the model also has powerful servomotors that can easily handle heavy loads. The quality and detail of this model are so far unique as an RTR model. Features: Large shovel painted white, a smaller one is also included New improved electronics Improved switch-off electronics for the arm Improved drive technology for the body Exclusive Amewi Edition Extensive scope of delivery Technical specifications: Construction: full metal Drive: metal chains individually controllable Scale: 1:14 Dimensions: 700 x 480 x 180mm Weight: approx. 7 kg Number of channels: 23 channels Frequency: 2.4GHz Battery: LI-ION 7.4V 2000MAH Function: forwards, backwards, left, right, assembly to the left, assembly right, big arm up / down, small arm up / down, shovel up / down, light, sound, demo mode, smoke generator on / off, each chain individually controllable, Turn on the spot, turn while driving, sound on / off Scope of delivery: Excavator 1:14 metal RTR white Battery 7.4V Li-Ion 2000mAh 2.4GHz transmitter USB charger manual Small shovel Hammer drill metal Wood grapple metal Smoke oil screwdriver Required accessories: Transmitter battery: 3 x 1.5V AA Mignon[TAB:Sicherheitshinweise RC Modelle]Sicherheitshinweise RC Modelle
RC excavator full metal 1:14 RTR V4 in a leather-look case
RC excavator full metal 1:14 RTR V4 in a leather-look case Our top seller in a high-quality case! This full metal excavator in 1:14 scale leaves almost nothing to be desired. The arm, the shovel, the entire structure and each chain can be controlled separately. The model also has a sound and smoke generator. The tower can be rotated 360 ° endlessly! This high-quality processed and true-to-scale model of a crawler excavator closes the gap between toys and extremely high-priced functional model making. A total of 23 channels can be controlled with the full metal excavator. Thus, the model is in no way inferior to the original. The off-road capability in connection with the splash-proof electronics ensure untroubled fun and long durability of the individual components. In addition, the excavator comes with a wooden grab and a hammer drill made of metal. Thus, the model can be converted in a few simple steps! All gear parts are made of metal and the model also has powerful servomotors, which can easily handle heavy loads! The quality and detail of this model are so far unique as an RTR model. Technical specifications: Construction: full metal Drive: metal chains individually controllable Scale: 1:14 Dimensions: 700 x 480 x 180mm Weight: approx. 7 kg Number of channels: 23 channels Frequency: 2.4GHz Battery: LI-ION 7.4V 2000MAH Function: forward, backward, left, right, Assembly to the left, assembly to the right, large arm up / down, little arm up / down, Shovel up / down, light, sound, demo mode, Smoke generator on / off, each chain individually controllable, turn on the spot while turn while driving, sound on / off Scope of delivery: 1 x leather look transport case 1 x excavator 1:14 metal RTR 1 x battery 7.4V Li-Ion 2000mAh 1 x 2.4GHz transmitter 1 x USB charger 1 x instruction 1 x metal hammer 1 x metal wood grapple 1 x smoke oil 1 x screwdriver Is still needed: Transmitter battery: 3 x 1.5V AA Mignon
G704E Full metal excavator 1:14 RTR petrol
G704E Full metal excavator 1:14 RTR petrol Exclusive Amewi full metal excavator in a special paint job and an electronic quick coupler made in Germany This full metal excavator in 1:14 scale leaves almost nothing to be desired: the arm, the shovel, the entire structure and each chain can be controlled separately. The model also has a sound and smoke generator. The tower can be rotated 360° endlessly. For this exclusive Amewi edition, an electronic quick-change system has been designed in collaboration with a well-known German supplier of real excavator accessories. It is connected to the 3.5mm jack on the excavator's shovel arm, so that different shovels can be picked up without unscrewing them. (The quick coupler is not suitable for hammer drills, log grapples or scrap metal grapples.) The high-quality, true-to-scale model of a crawler excavator closes the gap between toys and high-priced functional model making. A total of 23 channels can be controlled. Thus, the model is in no way inferior to the original. The off-road capability in connection with the splash-proof electronics ensures unadulterated fun and a long service life for the individual components. In addition, a wooden gripper and a metal hammer drill are included with the excavator. This means that the model can be converted in just a few simple steps. All gear parts are made of metal. The model also has powerful servo motors that can easily handle heavy loads. The quality and attention to detail are almost unrivalled in an RTR model of this size. Features: RTR set (Ready-to-Run) incl. remote control and battery Robust metal construction Individually controllable track drives Electronic quick-change system made of CNC-milled aluminium, change buckets in no time at the push of a button Engine/function sound can be switched on and off Splash-proof electronics Additional log grapple and hammer drill included in the scope of delivery Functions: forward, reverse, left, right, superstructure to the left, superstructure to the right, large arm up/down, small arm up/down, shovel up/down, light, sound, demo mode, smoke generator on/off, each track can be controlled individually, turn on the spot Technical data: Scale: 1:14 Length (extended arm): 700mm Width: 480mm Height: 180mm Weight: approx. 7kg Remote control: 23 channels, 2.4GHz Battery: Li-Ion 2S 7.4V 2000mAh, XT30 connector, 69x37x19mm 93g Charging cable: USB Contents: Model Electronic quick coupler made of milled aluminium Drill hammer Wood gripper Battery Remote control USB charging cable Smoke fluid Screwdriver Instructions DE/EN Required accessories: 3x 1.5V AA batteries for the remote control
RC full metal hydraulic excavator G101H 1:16 RTR white
RC full metal hydraulic excavator G101H 1:16 RTR white Exclusive high-quality track excavator in 1:16 scale as an RTR model in the exclusive Amewi design with 2.4GHz transmitter, battery, charger and all accessories that are required for operation (except batteries for the transmitter). High quality workmanship paired with high quality technology, this is the best way to describe this model. The entire structure is made of metal and the booms as well as the implement (shovel) are hydraulically driven. The chassis is operated with brushless motors and one motor is responsible for each left and right sprocket. The hydraulic pump also works with a brushless motor. This means that there is always enough power available for upcoming work. The model can be operated very sensitively via the supplied 2.4GHz transmitter with Euro control (stick assignment as in a real excavator). The lighting can also be switched via the transmitter. Other optional add-on parts can also be controlled via the transmitter. This leaves enough space for your own ideas. This noble model is delivered in a sturdy wooden box. Technical note: The excavator is equipped with a hydraulic system that does not run permanently. The hydraulic pump is only active when the boom or shovel is activated. It is normal for the main boom to sink slightly when it is extended. This saves a lot of electricity compared to a permanently running hydraulic system. Features: Very stable, white painted body made of cast metal Brushless hydraulic pump for fast flow 4 switchable LED headlights to illuminate the "construction site" 10K mAh lithium ion battery for long runtimes Stable metal undercarriage with steel chains Upper carriage can be endlessly rotated through 360 ° Stable wooden box for easy transport Big metal shovel Noble 2.4GHz transmitter with type designation of the excavator Technical specifications: Weight model ready to drive: 10kg Upper carriage width: 165mm Height above superstructure: 159mm Height above cabin: 185mm Ground clearance upper carriage: 78mm Tail length: 165mm Wheelbase: 235mm Undercarriage length: 282mm Undercarriage ground clearance: 29mm Chain height: 66mm Track width: 145mm Base plate width: 92mm Width over chains: 195mm Boom height: 200mm Length at the bottom: 230mm Total length: 620mm Total length with extended arms: 800mm Lifting force depending on the delivery: 12-15kg Battery: Li-Ion, 7.4V, 10,000mAh Charger: LiPo / LiIon charger 2S / 3S Hydraulic oil: # 46 Transmitter: FS-i6S with 2.4GHz touch display Scope of delivery: G101H excavator Remote control FS-i6S 2.4Ghz Li-Ion battery pack 7.4V 10,000mAh USB charging cable Hydraulic oil operation manual Required accessories: 4x AA Mignon batteries for the transmitter
RC Hydraulic Wheel Loader G921H Full Metal 1:16 RTR petrol
RC Hydraulic Wheel Loader G921H Full Metal 1:16 RTR petrol Hydraulic scale replica of a well-known wheel loader in full metal and exclusive petrol paint. With lockable differentials, 2-speed manual gearbox and oscillating axle, it provides an exceptional driving experience. Weighing approx. 11kg, this 1:16 scale construction machine can be moved on almost any surface thanks to its solid rubber tyres. The power of the boom, the brushless drive and the hydraulically controlled bucket are above average in comparison to its own weight and enable trouble-free working even with heavy material such as earth, gravel or other bulk material. The heart of the hydraulic control system is a brushless high-performance pump with overflow valve and a flow rate of approx. 400ml/min. In addition, the system is equipped with 3-way change-over valves and an air-oil cooler. The wheel loader is controlled via a high-quality proportional 2.4GHz remote control. A total of ten functions can be operated. With bright LED headlights at the front and rear, nothing stands in the way of use even at dusk and in the dark at night. In addition to the above-mentioned features, the bodywork, the interior and the axle joints provide the real scale factor. Almost every detail has been scaled down. The overall power, speed and manoeuvrability of this model is significantly higher than that of wheel loaders with e.g. electric spindle drives - thus closing the gap between entry-level models and functional modelling. The G921H is wonderfully suited as a transition from our electric 1:14 wheel loaders to the upper class. Highlights: Hydraulic quick articulated steering: for maximum manoeuvrability on any surface Differentials that can be locked via the remote control: give the model maximum drive power in difficult terrain 2-speed gearbox shiftable from the transmitter: For different speeds and perfect power transmission off-road Further features: Full metal model with very high dead weight High-quality brushless motors for drive and hydraulic pump Gearbox with hardened steel gears Hydraulic cylinder with welded screw-on block for high tightness Easy access to electronics and battery through a large maintenance hatch at the rear Solid rubber tyres for good traction on any terrain 4WD all-wheel drive LED lighting Large 7500mAh 7.4V battery included 220V plug-in charger included Stylish 16-channel 2.4Ghz transmitter included Model ready bound and set up, just fill up with oil before first launch Hydraulic oil included Technical data: Scale: 1:16 Length: 575mm width: 180mm Height: 210mm Weight: approx. 11kg Wheelbase: 221mm Track width front: 182mm Track width rear: 185mm Ground clearance: 34mm Front wheels: outside diameter/width 105/38mm Rear wheels: outside diameter/width 105/38mm Rim diameter: 56mm Gearbox: 2-speed metal gearbox Brake: electronic Controller: Brushless motors: Brushless Drive system: Cardan Steering: Hydraulic Main material: Metal Battery compartment dimensions: 72 x 36 x 52mm Battery: Li-Ion, 2S, 7,4V, 7500mAh 15C, Softcase, XT30 connector LxWxH: 65x55x35mm, 284g Riding time: approx. 30-45min, depending on use and terrain Top speed: approx. 9 km/h in second gear Remote control: 16 channels 2,4GHz Range: approx. 150m Charger: 220V plug-in charger for 2 and 3S batteries with balancer connection and 1.5A output Charging time: approx. 3-4 hours depending on battery status Scope of delivery: Model Transmitter Battery Charger Hydraulic oil Filling bottle Binding plug Operating instructions DE/EN Required accessories: 4x 1.5V Mignon AA batteries for the transmitter
RC Hydraulic Military Wheel Loader G921H full metal 1:16 RTR military green
RC Hydraulic Military Wheel Loader G921H full metal 1:16 RTR military green Hydraulic scale replica of a well-known wheel loader in full metal and exclusive olive green paint, which provides an exceptional driving experience with lockable differentials, 2-speed manual transmission and oscillating axle. Weighing approximately 11kg, this 1:16 scale construction machine can be moved on almost any surface thanks to its solid rubber tires. The power of the boom, the brushless drive and the hydraulically controlled bucket are above average compared to its own weight and enable trouble-free work even with heavy material such as earth, gravel or other bulk material. The heart of the hydraulic control system is a brushless high-performance pump with overflow valve and a flow rate of approximately 400ml/min. In addition, the system is equipped with 3-way reversing valves and an air-oil cooler. The wheel loader is controlled via a high-quality proportional 2.4GHz remote control. A total of ten functions can be operated. Having bright LED headlights at the front and rear, nothing stands in the way of use even at dusk and in the dark at night. In addition to the features mentioned above, the elaboration of the body, the interior and the axle joints also provide the real scale factor. Almost every detail has been scaled down. The overall power, speed and maneuverability of this model is significantly higher than wheel loaders with e.g. electric spindle drives - closing the gap between entry-level models and functional model building. The G921H is wonderfully suited as a transition from our electric 1:14 wheel loaders to the upper class. Highlights: Hydraulic quick articulated steering: for maximum maneuverability on any surface. Differentials that can be locked via the remote control: Give the model maximum driving power on difficult terrain 2-speed transmission switchable from the transmitter: For different speeds and perfect power transmission off-road Other features: Full metal model with very high dead weight High-quality brushless motors for drive and hydraulic pump Gearbox with hardened steel gears Hydraulic cylinder with welded screw-on block for high tightness Easy access to electronics and battery through a large maintenance hatch at the rear Solid rubber tires for good traction on any terrain 4WD all-wheel drive LED lighting Large 7500mAh 7.4V battery included 220V plug-in charger included Noble 16 channel transmitter 2,4Ghz included Model ready bound and set up, just fill up oil before first take off Hydraulic oil included Technical data: Scale: 1:16 Length: 575mm Width: 180mm Height: 210mm Weight: approx. 11kg Wheelbase: 221mm Track width front: 182mm Track width rear: 185mm ground clearance: 34mm Front wheels: outside diameter/width 105/38mm Rear wheels: outside diameter/width 105/38mm Rim diameter: 56mm Gearbox: 2-speed metal gearbox Brake: electronic Controller: brushless Motors: Brushless Drive system: Cardan Steering: Hydraulic Main material: Metal Battery compartment dimensions: 72 x 36 x 52mm Battery: Li-Ion, 2S, 7,4V, 7500mAh 15C, Softcase, XT30 connector LxWxH: 65x55x35mm, 284g Ride time: approx. 30-45min, depending on purpose and surface Top speed: approx. 9 km/h in second gear Remote control: 16 channels 2,4GHz Range: approx. 150m Charger: 220V plug-in charger for 2 and 3S batteries with balancer connection and 1.5A output Charging time: approx. 3-4 hours depending on battery condition Scope of delivery: Model Transmitter Battery Charger Hydraulic oil Filling bottle Binding plug Instruction manual DE/EN Required accessories: 4x 1.5V Mignon AA batteries for the transmitter
RC Hydraulic Wheel Loader G921H Full Metal 1:16 RTR White
RC Hydraulic Wheel Loader G921H Full Metal 1:16 RTR White Hydraulic scale replica of a well-known wheel loader in full metal and white paint, which provides an exceptional driving experience with lockable differentials, 2-speed manual gearbox and oscillating axle. This approx. 11kg construction machine in 1:16 scale can be moved on almost any surface thanks to its solid rubber tyres. The power of the boom, the brushless drive and the hydraulically controlled bucket are above average in comparison to its own weight and enable trouble-free working even with heavy material such as earth, gravel or other bulk material. The heart of the hydraulic control system is a brushless high-performance pump with overflow valve and a flow rate of approx. 400ml/min. In addition, the system is equipped with 3-way change-over valves and an air-oil cooler. The wheel loader is controlled via a high-quality proportional 2.4GHz remote control. A total of ten functions can be operated. With bright LED headlights at the front and rear, nothing stands in the way of use even at dusk and in the dark at night. In addition to the above-mentioned features, the bodywork, the interior and the axle joints provide the real scale factor. Almost every detail has been scaled down. The overall power, speed and manoeuvrability of this model is significantly higher than that of wheel loaders with e.g. electric spindle drives - thus closing the gap between entry-level models and functional modelling. The G921H is wonderfully suited as a transition from our electric 1:14 wheel loaders to the upper class. Hydraulic quick articulated steering: for maximum manoeuvrability on any terrain Differentials that can be locked via the remote control: give the model maximum driving power in difficult terrain 2-speed gearbox shiftable from the transmitter: For different speeds and perfect power transmission off-road Further features: Full metal model with very high dead weight High-quality brushless motors for drive and hydraulic pump Gearbox with hardened steel gears Hydraulic cylinder with welded screw-on block for high tightness Easy access to electronics and battery through a large maintenance hatch at the rear Solid rubber tyres for good traction on any terrain 4WD all-wheel drive LED lighting Large 7500mAh 7.4V battery included 220V plug-in charger included Stylish 16-channel 2.4Ghz transmitter included Model ready bound and set up, just fill up with oil before first launch Hydraulic oil included Technical data: Scale: 1:16 Length: 575mm width: 180mm Height: 210mm Weight: approx. 11kg Wheelbase: 221mm Track width front: 182mm Track width rear: 185mm Ground clearance: 34mm Front wheels: outside diameter/width 105/38mm Rear wheels: outside diameter/width 105/38mm Rim diameter: 56mm Gearbox: 2-speed metal gearbox Brake: electronic Controller: Brushless motors: Brushless Drive system: Cardan Steering: Hydraulic Main material: Metal Battery compartment dimensions: 72 x 36 x 52mm Battery: Li-Ion, 2S, 7,4V, 7500mAh 15C, Softcase, XT30 connector LxWxH: 65x55x35mm, 284g Riding time: approx. 30-45min, depending on use and terrain Top speed: approx. 9 km/h in second gear Remote control: 16 channels 2,4GHz Range: approx. 150m Charger: 220V plug-in charger for 2 and 3S batteries with balancer connection and 1.5A output Charging time: approx. 3-4 hours depending on battery status Scope of delivery: Model Transmitter Battery Charger Hydraulic oil Filling bottle Binding plug Operating instructions DE/EN Required accessories: 4x 1.5V Mignon AA batteries for the transmitter