RC Elmod Accessories
ElMod FX Taigen Adapter
Elmod FX Taigen is an adapter board for Taigen tanks with 360 ° tower and standard mechanics, which are equipped with the Taigen Cannon Smoking Generator. With this product, the connection of such a model to ElMod FusionX is particularly easy. ELMOD FX Taigen is used to connect a thousand tank with 360 ° tower with standard mechanism and tapping gunmenschenerator to Elmod FusionX. scope of delivery Elmod FX Taige board for installation in the tower General Dimensions: 47mm x 11mm
Adapter for HengLong TK-6.x/7.x Tanks
This adapter is for an easy connector of a HengLong® tank which was originally equipped with the TK-6.x or TK-7.x electronics to an ElMod Fusion ECO or PRO. It provides appropriate connectors to the turret rotation motor, turret elevation motor, shot motor, main light and MG muzzle flash. Scope of delivery Adapter for use with an ElMod Fusion ECO or PRO central unit. (The pictured central unit is not included in the scope of delivery).
ElMod FX SBus
ElMod FX SBus The ElMod FX SBus is connected between an ElMod FusionX or ElMod 4WD and an SBus-compatible (D16 protocol) receiver. This allows the central unit to be controlled with up to 16 channels: Channels 1 to 4 for the basic functions (driving and turret) Channels 5 to 15 can be assigned a total of 44 functions (four functions per channel) Channels 5 to 7 are already preassigned (e.g. shot, MG, light, turn signal, starter). However, the assignment can be changed as desired. Channel 16 for an optional volume control The ElMod FX SBus cannot be used together with the ElMod FX Stabi. Scope of delivery ElMod FX SBus board General Very simple connection: just plug in a connector. The FX SBus is automatically detected by the central processing unit Hot plugin: connect and disconnect during operation Smallest dimensions (15 mm x 15 mm / 0.6" x 0.6") ElMod FX SBus is an adapter for connecting a SBus compatible receiver to an ElMod FusionX or ElMod 4WD central unit.
Fusion Adapter for HengLong TK-6.x-Battle Unit
The HengLong® TK-6.x Battle System Adapter Set for the ThinkTank Fusion enables the use of the HengLong® TK-6.x Battle System in connection with the ElMod Fusion ECO / PRO or Fusion Puma module. This means that all infrared combat functions of the Fusion central units can be used to the full extent and battles can be fought against vehicles that are equipped with an ElMod or a Tamiya®-compatible system. requirements A vehicle model equipped with an ElMod Fusion central unit. A HengLong® TK-6.x model with battle option. scope of delivery Connection board for Taigen® TK-6.x sensor mushroom and infrared transmitter LED ring to attach to the sensor mushroom for the hit display
ElMod Fusion Smoker Board
Please click here for manual: Manual ElMod Fusion Smoker Board Function The Fusion Smoker Board provides the capability of using a smoker generator with separate terminals for heater and fan with an ElMod Fusion ECO/PRO Rev. A-E. The current ElMod Fusion ECO/PRO Rev. F doesn't require this board! Smoke generators which provides a single terminal for the heater and fan may be attached to the ElMod Fusion ECO/PRO Rev. A-E central unit directly. In this case this board is also not necessary! In the delivery condition the board may drive a smoke generator which consumes a maximum current of 0,7 Ampere (heater and fan together). With a simple wiring alternative a smoke generator with current consumption of 2,5 Ampere for the heater and 2,5 Ampere for the fan may be used. Requirements A vehilce equipped with a supported type of ElMod central unit (ElMod Fusion ECO/PRO Rev. A-E) and a suitable smoke generator with separate terminals for heater and fan (or pump). Scope of delivery ready to use board a piece of shrink tube 15 cm of insulated wire for high power smoke generators
ElMod Bluetooth
ElMod Fusion Bluetooth ElMod Fusion Bluetooth is an additional board for all ElMod Fusion central units. It enables the configuration and monitoring of the central unit as well as the control of the model via a Bluetooth® radio connection. This additional board is the wireless alternative for the USB connection, which is included in the ElMod Central Units package. Scope of delivery Ready for use board. Requirements An ElMod Fusion ECO/PRO or Fusion Puma with a current firmware (V2.xx). A computer or notebook with Microsoft® Windows® 10 or Apple® MacOS® (from version 10.10) Operating system with Bluetooth capabilities (e.g. via a USB stick or built-in hardware) A tablet or smartphone with Android ® 5.0.1 “Lollipop” or higher.
Blinker Board for ElMod Fusion PRO
Manual Blinker Board Function The ElMod Blinker is an add-on for the ElMod Fusion PRO central unit. It provides the simulation of a blinker and a hazard lights with one or two LEDs per direction (more LEDs may be used by parallel connection) Scope of delivery ElMod Blinker for Fusion PRO ready to use board with two servo cables Wires and connectors for up to four LEDs Requirements an ElMod Fusion PRO with firmware version 1.09 or higher common LEDs in required quantity. No further electronic parts like dropping resistors are necessary. when using a common radio gear: a free channel with a 3-position switch (up-nuetral-down). Alternatively a slider or a rotary knob. a working USB or Bluetooth connection to the ElMod central unit for configuration
ElMod FX Battle
ElMod FX Battle ElMod FX Battle is an add-on to the ElMod FusionX central unit. It allows the use of an IR battle option from Tamiya®, HengLong® or Taigen®. This allows infrared battles to be fought between models equipped with a Tamiya® compatible battle system. Scope of delivery ElMod FX Battle board Connections Connector for a Tamiya Battle Unit® Two connectors for HengLong® TK6.x/TK7.x-compatible battle option One connector for Taigen® V1 Battleoption. For Taigen® V3 the sensor apple must be modified. This requires simple soldering work. General Very simple connection: just plug in a connector. The FX Battle is automatically detected by the central unit Hot plugin: connect and disconnect while running Smallest dimensions (30 mm x 18 mm / 1.2" x 0.7")
FX Expander
ElMod FX Expander ElMod FX Expander expands an ElMod FusionX or an ElMod 4WD to include turn signal functionality, three additional switchable light sources, and three servo connections. Scope of delivery ElMod FX Expander Board Six cables for connecting additional light sources Connectors 3x servo connector (with ElMod 4WD two usable) for multiple servo functions Steering with adjustable, speed-dependent steering angle Horizontal or vertical aiming of the main gun Barrel recoil simulation with separately adjustable retraction and extension speeds Hatch or wiper function to control moving parts of the model Servo reversal, separately adjustable left and right servo stop Indicator with two LEDs each for left or right turn signal. Warning flasher function. Two more switchable light channels with two LEDs per light channel Another switchable light channel for one LED Muzzle flash for an auxiliary MG (with ElMod 4WD: main MG) with adjustable flashing frequency Configurable state of the light channels after the vehicle is switched on By parallel or series connection of the LEDs, more than two or one LED per light channel can be connected General Very simple connection: just plug in a connector. The FX Expander is automatically detected by the central unit Hot plug-in: connect and disconnect during operation Compact dimensions (40 mm x 23 mm / 1.6" x 0.9")