RC Elmod Boards
ElMod 4WD
ElMod 4WD ElMod 4WD is a modern miniature central unit for all vehicles with one drive motor and servo steering. This central unit is designed for lightly armed military vehicles with a wheel drive or one-motor driven half-tracks. The universal central unit combines a variety of driving, lighting and sound functions in a compact board. With various expansion options you do not compromise and shape the range of functions according to your needs. Scope of delivery ElMod 4WD board Power supply cable One cable for the drive motor Cable set for analog receiver (eight channels + power supply) Volume control and connection cable for loudspeakers Four cables for the lighting USB dongle with USB cable Four double-sided adhesive foam rubber dots for fixing the board in the model Optional accessories FX Expander: servos, turn signals and advanced light functions FX SBus: Connects to SBus-compatible receivers. Allows up to 16 channels to be used. ElMod Bluetooth: configuration and driving functions via Bluetooth® Drive 10 A strong, short-circuit and overload protected driver for the drive motor Physics engine: realistic driving behavior by simulating mass inertia. The vehicle drives "like a big one". Acceleration, deceleration, top speed, gear shifting and many other characteristics are simulated. All driving parameters are adjustable Steering Steering via steering axe and a servo motor with optional speed-dependent steering traverse With optionally available FX Expander: Steering of up to two more individually configurable steering axes via servos with optional speed-dependent steering traverse Weapons With optional FX Expander: MG muzzle flash via LED with adjustable firing cadence Vertical and horizontal adjustment of the main gun with servo motors Shot sound of the main weapon Lighting One or two LEDs can be connected directly to all light channels. No further wiring is necessary. All light connections are short circuit proof. The LEDs can not be damaged in case of accidental polarity reversal. Dimmable front light that can be switched off via the remote control Combined tail light with brake light with separately adjustable brightness With optional FX Expander: Three additional freely assignable light channels Indicator with warning light function Servo functions With optional FX Expander: connect up to two servos for different functions, for example (list not complete): vertical and horizontal movement of the main gun control of additional steering axis Opening and closing of hatches Operating windshield wipers or radar Max. 2 A continuous current consumption for all servos together Sound generation and noise Support of all ElMod sample sets for extra prototypical sound reproduction Integrated sound unit plays several different sounds simultaneously Sound types drive Multiple starter sounds with distinction between cold and warm start Multiple shutdown and start-up sounds, engine sounds for driving with simulated gear changes and distinction between full load, part load, engine brake and mechanical brake. Turbocharger whistling No steps between engine sounds Speed-dependent driving sounds such as chain or chassis squeal Optional ambient and environmental noises Speed-dependent turret rotation noise with optional distinction between drive without and with motor assistance Sound for elevation of the main gun Fire from main gun optionally as single shot or continuous fire (e.g. flak) Variable sounds for bullet impact with simulation of impact at different distances Shooting noise for MG Up to 24 individual sounds that can be triggered via the radio system, such as horn, radio announcements, etc. Plain text announcement when battery voltage is too low/too high Configurable volume level of a noise type (e.g. raising the volume of the MG and lowering the volume of the engine) and configuration of multiple sound parameters Adjustment of the volume via an included rotary potentiometer Adjustment of the volume via a rotary knob on the remote control All included sample sets are stored on a PC/notebook-readable microSD card. They may be changed at runtime via the ElMod app. Integrated 10 W digital audio amplifier for connecting an 8 ohm speaker Control Analog receiver A commercial model remote control system (transmitter and receiver, 40 MHz or 2.4 GHz) Connection for up to eight channels Two channels for driving One channel for optional volume control A total of 20 additional functions can be assigned largely freely in addition to the basic functions The receiver requires no additional power supply. 5 V BEC are provided SBus Requires the optionally available FX SBus adapter. An SBus compatible model remote control system Use of up to 16 channels Simple wiring. Only one connector with three wires for power and all signals. Four channels for basic functions (driving, turret, weapons) One channel for optional volume control A total of 44 other functions can be distributed over 11 channels in addition to the basic functions The receiver does not require an additional power supply. 5 V BEC are provided Bluetooth / USB For wireless connection. Requires the optional Bluetooth adapter. Control conveniently on an Android smartphone or tablet or PC or notebook Configuration The free ElMod app provides extensive configuration options on the computer USB dongle with a USB cable is included Available for Microsoft® Windows® 10, Apple® MacOS® and Android® Parameterization, status information and control of all vehicle functions Individual vehicle profiles can be created and saved General Operation on NiCd, NiMh or LiPo, LiIon batteries with a voltage between 7.2 V and 11.2 V Undervoltage cutoff to protect against deep discharge Overvoltage shutdown All connectors of socketed type Included commercial 15A automotive fuse for drive protection Integrated resettable SMD fuse for protection of turret functions Compact dimensions (63 mm x 39 mm / 2.5" x 1.5")
ElMod FusionX
Description The universal central unit combines a variety of driving, lighting, weapons, and sound functions in a compact board. With various expansion options you do not compromise and shape the range of functions according to your needs. . Scope of delivery ElMod FusionX board Power supply connection kit (connector, cable, fuse holder and fuse) Two connector plugs for drive motors Cable set for analog receiver (eight channels + power supply) Volume control and connection cable for loudspeakers USB dongle with USB cable Four double-sided adhesive foam rubber dots for fixing the board in the model Optional accessories FX Expander: servos, turn signals and advanced light functions FX Battle: Connects to BU options from Tamiya, HengLong and Taigen FX SBus: Connects to SBus-compatible receivers. Allows up to 16 channels to be used. ElMod Bluetooth: configuration and driving functions via Bluetooth® TK6 adapter: Simplified connection of turret functions and lighting to HengLong® vehicles with TK6.x electronics Tamiya adapter: Simplified connection of turret functions and lighting to Tamiya® models Drive 2×15 A strong (2×30 A peak current), short-circuit and overload protected drivers for one or two drive motors Use of an overlay gearbox is possible Physics engine: realistic driving behavior by simulating mass inertia. The vehicle drives “like a big one”. Acceleration, deceleration, top speed, gear shifting and many other characteristics are simulated. All driving parameters are adjustable Steering Steering via chains with extensive adjustment options (Disableable) turning around the vertical axis (“Spin Turn”) For light models: integrated servo connection (max. 300mA) for steering via a steering axis with optional speed-dependent steering deflection. With optionally available FX Expander: Steering of up to three individually configurable steering axes via servos with optional speed-dependent steering traverse, even for heavy models. Turret functions and weapons . HengLong®/Taigen® compatible connector for turret assembly Optional available adapter for a Tamiya® turret assembly Fully proportional turret rotation via a motor with max. 1.5A current Fully proportional gun relevation via a motor with max. 1.5A current Control of a shot motor with max. 2A current Control of Tamiya® barrel recoil mechanism with separately adjustable retraction and extension speed Support for HengLong® and Taigen® barrel recoil mechanism with evaluation of the end position switch and synchronization with the firing sound Support for Taigen® servo electronics for barrel recoil (simple version) Support for Taigen® servo-equipped turret (elevation and shoot via servos) Simulation of barrel recoil via servo motor with separately adjustable retraction and extraction speed and adjustable traverse limit Connection for Taigen® xenon flash or HengLong® LED muzzle flash MG muzzle flash via LED with adjustable firing cadence Optional shot recoil simulation via adjustable jolt of the chassis With optional FX Expander: muzzle flash of a second MG with adjustable firing cadence (In preparation) With optional FX Stabi: 2-axis stabilization of the main gun on modern tanks Lighting One or two LEDs can be connected directly to all light channels. No further wiring is necessary. All light connections are short circuit proof. The LEDs can not be damaged in case of accidental polarity reversal. Dimmable front light that can be switched off via the remote control Combined tail light with brake light with separately adjustable brightness With optional FX Expander: Three additional freely assignable light channels Indicator with warning light function Servo functions Integrated connector for a 9g class servo (micro servo). Maximum current consumption approx. 300mA. With optional FX Expander: connect up to three servos for different functions, for example (list not complete): vertical and horizontal movement of the main gun control of a steering axis Opening and closing of hatches Operating windshield wipers or radar Max. 2 A continuous current consumption for all servos together Smoke function Supports a smoke unit for motor exhaust with load and motor noise dependent smoke output Optional connection of a simple smoker or a smoker with separate control for heating and fan Sound generation and noise Support of all ElMod sample sets for extra prototypical sound reproduction Integrated sound unit plays several different sounds simultaneously Sound types drive Multiple starter sounds with distinction between cold and warm start Multiple shutdown and start-up sounds, engine sounds for driving with simulated gear changes and distinction between full load, part load, engine brake and mechanical brake. Turbocharger whistling No steps between engine sounds Speed-dependent driving sounds such as chain or chassis squeal Optional ambient and environmental noises Speed-dependent turret rotation noise with optional distinction between drive without and with motor assistance Sound for elevation of the main gun Fire from main gun optionally as single shot or continuous fire (e.g. flak) Variable sounds for bullet impact with simulation of impact at different distances Shooting noise for MG Shooting noise for auxiliary MG Up to 24 individual sounds that can be triggered via the radio system, such as horn, radio announcements, etc. Plain text announcement when battery voltage is too low/too high Sounds for IR combat mode Configurable volume level of a noise type (e.g. raising the volume of the MG and lowering the volume of the engine) and configuration of multiple sound parameters Adjustment of the volume via an included rotary potentiometer Adjustment of the volume via a rotary knob on the remote control All included sample sets are stored on a PC/notebook-readable microSD card. They may be changed at runtime via the ElMod app. Integrated 10 W digital audio amplifier for connecting an 8 ohm speaker Control Analog receiver A commercial model remote control system (transmitter and receiver, 40 MHz or 2.4 GHz) Connection for up to eight channels Four channels for basic functions (driving, turret, weapons) One channel for optional volume control A total of 40 additional functions can be assigned largely freely in addition to the basic functions The receiver requires no additional power supply. 5 V BEC are provided SBus adapter. Requires the optionally available FX SBus An SBus compatible model remote control system Use of up to 16 channels Simple wiring. Only one connector with three wires for power and all signals. Four channels for basic functions (driving, turret, weapons) One channel for optional volume control A total of 44 other functions can be distributed over 11 channels in addition to the basic functions The receiver does not require an additional power supply. 5 V BEC are provided Bluetooth / USB For wireless connection. Requires the optional Bluetooth adapter Control conveniently on an Android smartphone or tablet or PC or notebook IR combat function Connects via an optional FX Battle adapter to either the Tamiya® BU apple, HengLong® or Taigen® Battle Option Simple configuration via a single button Vehicle type: light, medium, heavy Test mode responds to most infrared remotes to verify battle function Configuration The free ElMod app provides extensive configuration options on the computer USB dongle with a USB cable is included Available for Microsoft® Windows® 10, Apple® MacOS® and Android® Parameterization, status information and control of all vehicle functions Individual vehicle profiles can be created and saved General Operation on NiCd, NiMh or LiPo, LiIon batteries with a voltage between 7.2 V and 11.2 V Undervoltage cutoff to protect against deep discharge Overvoltage shutdown All connectors of socketed type Included commercial 15A automotive fuse for drive protection Integrated resettable SMD fuse for protection of turret functions Compact dimensions (76 mm x 50 mm / 3″ x 2″) [TAB:Sicherheitshinweise Elektronik]Sicherheitshinweise Elektronik