RC Taigen Gear Boxes
Spare brass inserts for Heng Long / Taigen gearboxes
Spare brass inserts for Heng Long and Taigen gearboxes Scope of supply: 6 brass inserts Dimensions: Outside diameter 8 mm Inside diameter for axes: 3.6 mm
Metalgearset Standard Heng Long and Taigen Tiger 1 Panzer 3 Panzer 4
Metalgearset Standard Heng Long and Taigen Tiger 1 Panzer 3 Panzer 4
Standard metal gear for Heng Long 3938 Russia T90 with long axis
Metal Engine / Gear Set right / left for 1:16 tank from Heng Long Suitable for Heng Long 1/16 Russia T90 3938 Drive-Complete set with 2 motors, the left and right metal gear consisting of: * 2 motors * Metal gear unit on the right & left with long drive shaft
3:1 METAL GEAR with long axle for Panther G and Jagdpanther
3:1 METAL GEAR with long axle for Panther G (with plastic chassis) and Jagdpanther ADVANTAGES AT A GLANCE: - 3:1 translation - powerful motors 18,000 rpm - All gears and drive axle are mounted in brass bushes Installation is very easy. The old attachment points can be used.
Metal Gears 4:1 Long Axle 1:16 Heng Long / Taigen
Metal Gears 4:1 Long Axle 1:16 Heng Long / Taigen High/Low, 4:1, 58mm Zinc Alloy Gearboxes 380 motor @ 18k RPM Zinc alloy gears Bushings Actual gear reduction of 90:1 Fits: M41 Bulldog, M26 Pershing, Panther G (Metal), Panther F, King Tiger (not Heng Long Kingtiger with 6.0/S or 6.1/S electronics) and Jagdtiger
4:1 METAL GEAR with short axle for Tiger
4:1 METAL GEAR with short axle for Tiger 3818 / German Panther 3819 With this transmission you can easily drive over obstacles in the terrain. The gears are much stronger than the standard metal Heng Long gears!!! ADVANTAGES AT A GLANCE: - The gears each have one more gear (gear ratio 3/1) - more powerful motors 18,000 rpm - All gears are mounted in brass bushes - The drive axle is mounted in brass bushes too Installation is very easy. The old attachment points can be used.
4:1 Steel Gearset for KV-1 and KV-2 Tanks
NEW DESIGNED STEEL GEAR 4:1 KV1 KV2 PANZER Taigen HENG LONG short axis Attention! Only for metal pan and Metal driving wheels! With this gear, you easily drive over Obstacles in the terrain. The transmission is significantly stronger than the standard Heng Long Metal Gear and with the new steel gears very long durable! BENEFITS AT A GLANCE: - The gear each have a gear more (Translation 4/1) - More powerful engines 18,000 u / min - All gears are made of metal and brass book narrowness Superimposed - The drive axle is full ball bearings, so no play is detected
3 in 1 Pro steel gearset long Axis with full sets flange bearing ( 16pcs )
3 in 1 Pro steel gearset long axis with full sets flange bearing ( 16pcs )3838 (M26 Pershing) 3839 (M41 Walker Bulldog) 3889 (Leopard 2 A6) 3918 (US M1A2 Abrams) Sale Point : More Stability and More Smooth . 1. Gear Made By Pure Steel . 2. More Accurate And Smooth. 3 .They feature a drive ration of 3 in 1 providing more power . 4. New Powerful 380 Motors with 13000RPM . 5. Each Gear with flange bearings. For following Heng Long and Taigen tanks:
Taigen high quality hobby gearset 5in1 with bearing double steel licmas-tank
Taigen high quality hobby gearset 5in1 with bearing double steel licmas-tank 5in1 double steel gearset with axis ball bearing for Heng Long and Taigenmodels. Take care: use only for plastic tanks! Sale Points: Low Speed with High torque . Gear Made By Pure Steel . More Durable Than Brass Gears . More Accurate And Smooth Than Brass Gears . They feature a drive ratio of 5 in 1 providing more power . New Powerful 360 Motors with 17500RPM Gear for following Models: 3818 (Tiger 1) 3819 (Pantiger) 3848 (Panzer 3) 3849 ( Tauchpanzer 3) 3868 (Stug Ausf. G) Dimensions: Axis length from outer side 23 mm Axis diameter 8 mm Length 87 mm Height 36 mm Width 43 mm without motor Width with motor 53 mm
Taigen high quality pro steel gear 4in1 full ball bearings long axis tank licmas
Taigen high quality pro steel gear 4in1 full ball bearings with long axis Brand new 4in1 steel gears now full ball bearings for Heng Long and Taigenmodels. Sale Point : More Stability and More Smooth Gear Made By Pure Steel . More Accurate And Smooth. They feature a drive ration of 4 in 1 providing more power . New Powerful 380 Motors with 18000 RPM . Each Gear with flange bearings. For following Models: 3838 (M26 Pershing) 3839 (M41 Walker Bulldog) 3879 (Panther Typ G) 3888 (Königstiger, not Heng Long Kingtiger with 6.0/2 or 6.1/S electronics)) 3889 (Leopard 2 A6) 3918 (M1A2 Abrams) Dimensions: Axis length 59 mm Axis diameter 8 mm Length 90 mm Height 64 mm Width 28 mm without motor Width with motor 70 mm Shaft length 33 mm outer side
7:1 gear with ball bearings made of CNC milled steel for Tiger 1, Panzer 3, Panzer 4, IS2
7:1 gearbox with ball bearings made of CNC-milled steel for Tiger 1, Tiger 3, Tiger 4, IS-2 tanks Maximum power and precision for your tank models The latest and highest quality tank gearboxes from Taigen offer a perfect combination of robustness, efficiency and durability. Thanks to their precise workmanship and high-quality components, they are ideal for demanding model making. Features and functions: Motors: 390 size 28,000 RPM motors for powerful performance Material: CNC-machined steel gears for extreme durability Bearings: Ball bearings on all reduction and output shafts ensure smooth operation and minimized wear Mounting plates: Metal plates allow for easy installation and removal Dust covers: Two magnetic dust covers reduce noise and protect the gears Reduction ratio: 76:1 – perfectly tuned for optimal speed and power Performance and Advantages: Slightly faster than the 4:1 Panzer gearboxes, but much slower and more precise than 3:1 Panzer gearboxes Longer service life due to high-quality materials and protective mechanisms Reduced noise thanks to dust caps Compatibility: Suitable for: Panzer Tiger 1, Panzer 3, Panzer 4, Panzer IS-2 Note: Pictures 3-5 show the assembly in a Tiger 1 Taigen lower hull. With these gearboxes, you get the perfect blend of speed, power and smoothness – ideal for modelers who want to get the most out of their tanks. Perfect your models with these top-quality Taigen gearboxes and experience the highest quality in 1:16 scale. [TAB:Sicherheitshinweise Elektronik]Sicherheitshinweise Elektronik
7:1 gear with ball bearings made of CNC milled steel for Leopard 2 A6 tank, Kingtiger, Jagdtiger, Panther G/F, Jagdpanther tank
7:1 gearbox with ball bearings made of CNC-milled steel for Leopard 2 A6, King Tiger, Jagdtiger, Panther G/F and Jagdpanther tanks The ultimate upgrade for maximum performance and durability These latest and highest quality armored gearboxes from Taigen are the ideal choice for model builders who value precision and robustness. With first-class materials and a well-thought-out construction, they offer outstanding performance and reliability. Features and functions: Motors: 390 size 28,000 RPM motors for powerful and smooth performance Material: CNC-machined steel gears for extreme durability and longevity Bearings: Ball bearings on all reduction and output shafts minimize friction and wear Mounting plates: Sturdy metal mounting plates allow for easy installation and removal Dust protection: Two magnetic dust caps reduce noise and protect the gears from dirt Gear reduction: 76:1 gear ratio – perfect for power and precision Performance and benefits: Quieter than conventional gearboxes thanks to the magnetic dust caps Precise coordination between speed and power – faster than 4:1 Panzer gearboxes, but significantly slower and more controlled than 3:1 Panzer gearboxes Ideal for demanding off-road and driving applications Compatibility: Suitable for: Leopard 2 A6 tank (also Heng Long TK6.0/TK6.0S, TK7.0) King Tiger Tank (Taigen only) Jagdtiger Tank Panther G/F Tank Jagdpanther Tank Get the most out of your RC tank models with these tank transmissions. Perfectly smooth running, high durability and a long service life make these transmissions an indispensable upgrade for any model building enthusiast. Upgrade your tank now with the best technology from Taigen! [TAB:Sicherheitshinweise Elektronik]Sicherheitshinweise Elektronik
7:1 gear with ball bearings made of CNC milled steel for Sherman
7:1 gear with ball bearings made of CNC milled steel for Sherman High Quality 7in1 gearbox made of massive steel for 1/16 Sherman with metal hull. Suitable for heavy tanks with a high metal content! In the new Pro gearbox set for tank models, the particularly robust steel gears are mounted on ball-bearing drive shafts. This results in unsurpassed running characteristics of the transmission with a long lifetime. Due to the backlash-free steel gear wheels, the power of the motors arrives directly at the drive wheel of the chains, ideal for heavy models with metal trays, metal chains, metal rollers or similar. Details/Scope of Delivery: 1 pair 7in1 metal gearbox with 390 - motors for Sherman with metal hull Steel gears More powerful motors 18000 rpm
7:1 gear with ball bearings made of CNC milled steel for KV-1 and KV-2
7:1 gear with ball bearings made of CNC milled steel for KV-1 and KV-2 High Quality 7in1 gearbox made of massive steel for 1/16 KV-1 and KV-2. Suitable for heavy tanks with a high metal content! In the new Pro gearbox set for tank models, the particularly robust steel gears are mounted on ball-bearing drive shafts. This results in unsurpassed running characteristics of the transmission with a long lifetime. Due to the backlash-free steel gear wheels, the power of the motors arrives directly at the drive wheel of the chains, ideal for heavy models with metal trays, metal chains, metal rollers or similar. Details/Scope of Delivery: 1 pair 7in1 metal gearbox with 390 - motors for KV-1 and KV-2 Steel gears More powerful motors 18000 rpm