RC Taigen Main Boards
Taigen Soundbox Panther / Jagdpanther / King Tiger / Jagdtiger / Tiger 1 (late) / Sturmtiger (late) for rc tanks
Taigen Soundbox with Panther Sound for the Taigen boards V2 and V3. The soundbox can be connected to every Taigen board of the version V2 and V3. Just change them and they have the right sound for their tank. Delivery: 1 x soundbox as shown Sound example: Start engine, driving forward, reverse, turn on the spot, tower turn, cannon down-high, MG, cannon launch, engine off .
Taigen Soundbox Leopard 2A6 for rc tanks
Taigen Soundbox with Leopard 2A6 Sound for the Taigen boards V2 and V3. The soundbox can be connected to every Taigen board of the version V2 and V3. Just change them and they have the right sound for their tank. Delivery: 1 x soundbox as shown
Taigen Soundbox Tiger 1 for rc tanks
Taigen Soundbox with Tiger 1 Sound for the Taigen boards V2 and V3. The soundbox can be connected to every Taigen board of the version V2 and V3. Just change them and they have the right sound for their tank. Delivery: 1 x soundbox as shown Sound example: Start engine, driving forward, reverse, turn on the spot, tower turn, cannon down-high, MG, cannon launch, engine off .
Taigen Soundbox Sherman M4 for rc tanks
Taigen Soundbox with Sherman M4 Sound for the Taigen boards V2 and V3. The soundbox can be connected to every Taigen board of the version V2 and V3. Just change them and they have the right sound for their tank. Delivery: 1 x soundbox as shown Sound example: Start engine, driving forward, reverse, turn on the spot, tower turn, cannon down-high, MG, cannon launch, engine off
Taigen Soundbox IS-2 / T-34 / KV-1 / KV-2 for rc tanks
Taigen Soundbox with IS-2 Sound for the Taigen boards V2 and V3. The soundbox can be connected to every Taigen board of the version V2 and V3. Just change them and they have the right sound for their tank. Delivery: 1 x soundbox as shown
Taigen V3 Board (without Soundbox)
Taigen V3 2.4 GHz board To use the IR system, you need the new Taigen Battle Receiver (Art-Nr: p1264). The Taigen IR system is only compatible with Taigen 2.4 GHz models. Please note here that the MG Shot function can not be used here. The required connection cables to the receiver are optionally available (Art-Nr: 3336) in the shop. To control the board, a normal remote control with an external receiver (6 channels) can be connected. Heng Long's 4th generation dual sound system would need to change the wiring in the upper tub.Also in Heng Long models of the 3rd generation 2.4 GHz technology. The board can be installed in all Taigen tanks with IR function and BB function.The old Taigen 2.4 GHZ remote control (V1) can also be used with limitations (smoke module can not be switched via remote control) after binding. The board is controlled by the new V2 / V3 remote control. Scope of supply: 1 x Taigen V3 2.4 GHz board Attention: Please do not use LiPo or Li-ion batteries with this board.
Taigen V3 Board with IS-2 / T-34 / KV-1 / KV-2 sound box and anti-jerk function
Taigen V3 2.4 GHz board with sound box and anti-jerk function To use the IR system, you need the new Taigen Battle Receiver (Art-Nr: p1264). The Taigen IR system is only compatible with Taigen 2.4 GHz models. Please note here that the MG Shot function can not be used here. The required connection cables to the receiver are optionally available (Art-Nr: 3336) in the shop. To control the board, a normal remote control with an external receiver (6 channels) can be connected. Heng Long's 4th generation dual sound system would need to change the wiring in the upper tub.Also in Heng Long models of the 3rd generation 2.4 GHz technology. The board can be installed in all Taigen tanks with IR function and BB function.The old Taigen 2.4 GHZ remote control (V1) can also be used with limitations (smoke module can not be switched via remote control) after binding. The board is controlled by the new V2 / V3 remote control. Scope of supply: 1 x Taigen V3 2.4 GHz board with sound box and anti-jerk function as shown. Attention: Please do not use LiPo or Li-ion batteries with this board.
Taigen V3 Board with SHERMAN sound box and anti-jerk function
Taigen V3 2.4 GHz board with sound box and anti-jerk function To use the IR system, you need the new Taigen Battle Receiver (Art-Nr: p1264). The Taigen IR system is only compatible with Taigen 2.4 GHz models. Please note here that the MG Shot function can not be used here. The required connection cables to the receiver are optionally available (Art-Nr: 3336) in the shop. To control the board, a normal remote control with an external receiver (6 channels) can be connected. Heng Long's 4th generation dual sound system would need to change the wiring in the upper tub.Also in Heng Long models of the 3rd generation 2.4 GHz technology. The board can be installed in all Taigen tanks with IR function and BB function.The old Taigen 2.4 GHZ remote control (V1) can also be used with limitations (smoke module can not be switched via remote control) after binding. The board is controlled by the new V2 / V3 remote control. Scope of supply: 1 x Taigen V3 2.4 GHz board with sound box and anti-jerk function as shown. Attention: Please do not use LiPo or Li-ion batteries with this board.
Taigen V3 Board with Tiger 1 sound box and anti-jerk function
Taigen V3 2.4 GHz board with sound box and anti-jerk function To use the IR system, you need the new Taigen Battle Receiver (Art-Nr: p1264). The Taigen IR system is only compatible with Taigen 2.4 GHz models. Please note here that the MG Shot function can not be used here. The required connection cables to the receiver are optionally available (Art-Nr: 3336) in the shop. To control the board, a normal remote control with an external receiver (6 channels) can be connected. Heng Long's 4th generation dual sound system would need to change the wiring in the upper tub.Also in Heng Long models of the 3rd generation 2.4 GHz technology. The board can be installed in all Taigen tanks with IR function and BB function.The old Taigen 2.4 GHZ remote control (V1) can also be used with limitations (smoke module can not be switched via remote control) after binding. The board is controlled by the new V2 / V3 remote control. Scope of supply: 1 x Taigen V3 2.4 GHz board with sound box and anti-jerk function as shown. Attention: Please do not use LiPo or Li-ion batteries with this board.
Taigen V3 Board with Soundbox Panther / Jagdpanther / King Tiger / Jagdtiger / Tiger 1 (late) / Sturmtiger (late) sound box and anti-jerk function
Taigen V3 2.4 GHz board with sound box and anti-jerk function To use the IR system, you need the new Taigen Battle Receiver (Art-Nr: p1264). The Taigen IR system is only compatible with Taigen 2.4 GHz models. Please note here that the MG Shot function can not be used here. The required connection cables to the receiver are optionally available (Art-Nr: 3336) in the shop. To control the board, a normal remote control with an external receiver (6 channels) can be connected. Heng Long's 4th generation dual sound system would need to change the wiring in the upper tub.Also in Heng Long models of the 3rd generation 2.4 GHz technology. The board can be installed in all Taigen tanks with IR function and BB function.The old Taigen 2.4 GHZ remote control (V1) can also be used with limitations (smoke module can not be switched via remote control) after binding. The board is controlled by the new V2 / V3 remote control. Scope of supply: 1 x Taigen V3 2.4 GHz board with sound box and anti-jerk function as shown. Attention: Please do not use LiPo or Li-ion batteries with this board.
Taigen V3 Board with LEOPARD 2A6 sound box and anti-jerk function
Taigen V3 2.4 GHz board with sound box and anti-jerk function To use the IR system, you need the new Taigen Battle Receiver (Art-Nr: p1264). The Taigen IR system is only compatible with Taigen 2.4 GHz models. Please note here that the MG Shot function can not be used here. The required connection cables to the receiver are optionally available (Art-Nr: 3336) in the shop. To control the board, a normal remote control with an external receiver (6 channels) can be connected. Heng Long's 4th generation dual sound system would need to change the wiring in the upper tub.Also in Heng Long models of the 3rd generation 2.4 GHz technology. The board can be installed in all Taigen tanks with IR function and BB function.The old Taigen 2.4 GHZ remote control (V1) can also be used with limitations (smoke module can not be switched via remote control) after binding. The board is controlled by the new V2 / V3 remote control. Scope of supply: 1 x Taigen V3 2.4 GHz board with sound box and anti-jerk function as shown. Attention: Please do not use LiPo or Li-ion batteries with this board.
RC electronics set for IS-2 assembly kit V3 by Taigen
RC electronics set for IS-2 assembly kit V3 by Taigen Contains: 1 x Taigen ESC RX-18 with 2.4 GhZ receiver and fan V3 with IS-2 Soundbox incl. cables for external receiver 1 x Taigen remote control 1 x speaker SP-1 1 x Cable for power supply with on/off switch and recoil cable 1 x Volume control with cable 1 x cable set You are also going to need (not included in the electronics set): 1 x battery pack 7.2 V 1 x battery charger 7.2 V Optional (not included int the electronics set) : Smoke liquid
RC electronics set for Tiger 1 assembly kit V3 by Taigen
RC electronics set for Tiger 1 assembly kit V3 by Taigen Contains: 1 x Taigen ESC RX-18 with 2.4 GhZ receiver and fan V3 with Soundbox incl. cables for external receiver 1 x Taigen remote control 1 x speaker SP-1 1 x Cable for power supply with on/off switch and recoil cable 1 x Volume control with cable 1 x cable set You are also going to need (not included in the electronics set): 1 x battery pack 7.2 V 1 x battery charger 7.2 V Optional (not included int the electronics set) : Smok unit On/Off switch for smoke unit Smoke liquid
RC electronics set for Leopard 2 A6 assembly kit V3 by Taigen / Torro
RC electronics set for Leopard 2 A6 assembly kit V3 by Taigen / Torro Contains: 1 x Taigen ESC RX-18 with 2.4 GhZ receiver and fan V3 with Soundbox incl. cables for external receiver 1 x Taigen remote control 1 x speaker SP-1 1 x Cable for power supply with on/off switch and recoil cable 1 x Volume control with cable 1 x cable set You are also going to need (not included in the electronics set): 1 x battery pack 7.2 V 1 x battery charger 7.2 V Optional (not included int the electronics set) : Smok unit On/Off switch for smoke unit Smoke liquid