Special Items
Instructions for the installation of the Heng Long electronics in the Tiger 1 Kit 1:16 licmas tank
16-page instructions for installing the electronics in the Tiger 1 early version based on Heng Long 27 MHz 1:16. The installation of the electronic components in the Heng Long tank is described with many pictures in this very detailed manual. This manual is interesting for every Heng Long tank owner, because you can deduce how the electronic components on the tank attached and connected.
SPECIAL ITEM - Sandbags scale 1/16 model making diorama made of resin
Sandbags 1/16 scale modelling diorama Very nice, unpainted sandbags in 1/16 scale. Dimensions: approx. 35mm x 10mm x 19mm per sandbag Material: Resin Scope of delivery: 4 pcs as shown Note: The sandbag is supplied with printed supports. Recommendation: The pressure struts (supports) can be removed with small pliers or a scalpel. Light reworking is required in places after removal. Please wear a protective mask when working with resin.
2 x Motor pinion with 10 teeth
teeth 10 with pinion Motor The motor pinion fits all Heng Long Motors as well as on the 400 and 480s Jamara engines. Delivery scope: 2 x brass motor pinion with 10 teeth as shown
newest taigen volume control unit with cable and plug
1 x newest taigen volume control unit with cable and plug
defective B Goods Decal sticker set for Panzer STUG 3
defective B Goods Decal sticker set for Panzer STUG 3
RC tank track splash guard Plastic 1:16
RC tank track splash guard Plastic 1:16 Scope of delivery: 1 paar track splash guard plastic
SPECIAL POST - 1 pair of Heng Long axles - long
SPECIAL POST - 1 pair of Heng Long axles - long Delivery as shown. Dimensions: Length: 30.8 mm Axle diameter: 2.95 mm Head width: 0.85 mm Diameter of the head: 5 mm
SPECIAL POST - 1 pair of Heng Long axles - short
SPECIAL POST - 1 pair of Heng Long axles -short Delivery as shown. Dimensions: Length: 24.8 mm Axle diameter: 2.95 mm Head width: 0.9 mm Diameter of the head: 5,10 mm
REMAINING STOCK - Set of screws for Heng Long / Taigen models
REMAINING STOCK - Set of screws for Heng Long / Taigen models 10 screws in the set. Dimensions: length of the screw: 10.5 mm, diameter of the screw head: 4.55 mm, diameter of the thread: 2.95 mm
Switch for smoke unit original part Heng Long
1 x Switch module for smoke unit original part Heng Long
Tiger 1 plastic idler wheels painted Heng Long 1:16
1 pair Tiger 1 plastic idler wheels painted Heng Long 1:16 only for the metal chassis !!!
Heng Long IR Battle unit for tower with magnet
Heng Long IR Battle unit for tower with magnet Latest Heng Long battle unit with magnet and cable. Suitable for the following heng long systems: TK6.0, TK6.0S, TK6.1, TK6.1S
Spare parts for Clark TK22 board 2 x chip / FAT
Spare parts for Clark TK22 board 2 x chip / FAT
Special items defective RX 18 board 27MHz spare parts dispenser
1 x Special items defective RX 18 board 27MHz spare parts dispenser
Heng Long tank commander - plastic - unpainted - scale 1:16
Heng Long figure: Tank commander made of plastic, unpainted, scale 1:16 Movable arms.
Panther spare part metal axle set for Taigen metal idler wheels
1 x Panther spare part metal axle set for Taigen metal idler wheels like shown on picture
1/16 MG 42 Accessories Set Wehrmacht WW2 Metal painted
1/16 MG 42 Accessories Set Wehrmacht WW2 Metal painted Detailed set of the Wehrmacht made of metal. with three drum magazines and two bipods from WW2. Delivery and painting as shown Material: Metal
Special Item - Heng Long figure tank commander painted plastic 1:16
SPECIAL ITEM: - headphones missing - slight paint defects Instead of 7,95 € only 4,00 €!
Taigen/Torro spare parts kit for Sherman with MG 1/16
Taigen/Torro Plastik spare parts kit for Sherman with MG 1/16 Scope of delivery as shown.
Battery compartment cover for Taigen / Torro 2.4 GHz remote control
Battery compartment cover for Taigen / Torro 2.4 GHz remote control
Sample German Tank Crew Driver Normandy 1944 Half Body Figure UNPAINTED 1:16
SampleBox defectiveGerman tank crew Driver Normandy 1944 unpainted Very beautiful, detailed Half Body Figure of a German Tank Driver of the Wehrmacht in the Second World War. The figure is not painted and in a 1:16 scale. Dimensions: Height: approx. 28 mm Width: approx. 27.7 mm Depth: about 18.3 mm Scope of supply: 1 x part figure we depicted in the collection box