commercial vehicles
Driver figure for model vehicles such as Unimog, etc. Scale approx. 1:16, unpainted
Driver Figure for Model Vehicles, Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly in the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of the model can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x unpainted driver figure (Unimog not included).
Driver or Passenger Figure with Coffee Cup and Full Beard for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure with Coffee Cup and Full Beard for Model Vehicles, Scale approx. 1:16This figure holding a coffee cup can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Driver or Passenger Figure with Coffee Cup for Model Vehicles, Scale approx. 1:16
Driver or Passenger Figure with Coffee Cup for Model Vehicles, Scale approx. 1:16This figure holding a coffee cup can be used as a driver or passenger figure in a model vehicle, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: This is an unpainted resin figure as shown. The supports have already been removed.Scope of Delivery: 1x unpainted figure as shown.
Figure 1/14 worker safety waistcoat broom resin truck commercial vehicles construction site model making
Figure construction worker with safety waistcoat and broom made of resin 1/14 Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Hight, about 115mm. Note: The figure is supplied with printed supports. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 Worker shovel safety waistcoat resin truck utility vehicles construction site model making
Figure construction worker with safety waistcoat and shovel made of resin 1/14 truck truck commercial vehicles modelling Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 120 mm Note: The figure is supplied with printed supports. Recommendation: The pressure struts (supports) can be removed with small pliers or a scalpel. Slight reworking of the figure is required in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 construction worker with safety waistcoat and shovel made of resin Truck Commercial vehicles Construction site Model making
Figure 1/14 construction worker with safety waistcoat and shovel made of resin Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 88 mm Note: The figure is supplied with printed supports. Other scales possible on request. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 of foreman with safety waistcoat and writing pad made of resin Truck Commercial vehicles Construction site Model making
Figure 1/14 foreman with safety waistcoat and writing board made of resin The figure can be used on a building site as a foreman or on a lorry as a loading foreman, for example. Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 125 mm Note: The figure is supplied with printed supports. Other scales possible on request. Recommendation: The supports can be removed with small pliers or a scalpel. Slight reworking of the figure is necessary in places after removal. Please wear a protective mask when working on resin figures.
Figure 1/14 Worker jackhammer safety waistcoat Resin lorry truck commercial vehicles construction site model making
Figure construction worker with safety waistcoat and jackhammer made of resin 1/14 truck truck commercial vehicles modelling Scope of delivery: one figure unpainted in scale suitable for 1/14 - 1/16 Dimensions: Height approx. 122 mm Note: The figure is supplied with printed supports. Recommendation: The pressure struts (supports) can be removed with small pliers or a scalpel. Slight reworking of the figure is required in places after removal. Please wear a protective mask when working on resin figures.
Driver figure for model vehicles such as Scania, Unimog, etc. Scale approx. 1:16 – 1:18
Driver Figure for Model Vehicles, Scale approx. 1:16 – 1:18This driver figure (without lower legs) is designed for use in model vehicles in the scale of approx. 1:16 – 1:18, such as the Amewi Scania Tractor 770 or the Mercedes-Benz Unimog from Amewi. Each figure is manufactured in Germany and features a base paint job as shown.Product DetailsScale: approx. 1:16 – 1:18Dimensions: 55 mm (height) x 39 mm (width) x 44.6 mm (depth)Production: Made in Germany.Characteristics: Each figure is a hand-painted unique piece. The paint job represents a base finish.Product Note As each figure is painted individually by hand, there may be slight variations in appearance compared to the product photos. The figure is designed for a seated position in the driver's cab and has no legs.Assembly Instruction The figure is designed for a seated position in the driver's cab. Since it has no lower legs, it fits more easily into various models. For easy assembly in the Amewi Scania Tractor 770 (Item No. 22717, 22762, 22770) as well as the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of these models can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose without lower legs (Unimog and truck not included).
Driver figure for model vehicles such as Unimog, etc. Scale approx. 1:16
Driver Figure for Model Vehicles, Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany and features a base paint job as shown.Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: Each figure is a hand-painted unique piece of resin. The paint job represents a base finish.Product Note As each figure is painted individually by hand, there may be slight variations in appearance compared to the product photos. The figure is designed for a seated position in the driver's cab.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly in the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of the model can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose (Unimog not included).
Driver figure for model vehicles such as Unimog, etc. Scale approx. 1:16 brown hair
Driver Figure for Model Vehicles, Scale approx. 1:16This driver figure is designed for use in model vehicles in the scale of approx. 1:16, such as the Amewi Mercedes-Benz Unimog. Each figure is manufactured in Germany and features a base paint job as shown (brown hair).Product DetailsScale: approx. 1:16Dimensions: 81 mm (height) x 39 mm (width) x 55 mm (depth)Production: Made in Germany.Characteristics: Each figure is a hand-painted unique piece made of resin. The paint job represents a base finish.Product Note As each figure is painted individually by hand, there may be slight variations in appearance compared to the product photos. The figure is designed for a seated position in the driver's cab.Assembly Instruction The figure is designed for a seated position in the driver's cab. For easy assembly in the Amewi Unimog (Item No. 22630, 22631, 22632, 22660), we recommend the following procedure:The steering wheel of the model can be removed.Attach/insert the removed steering wheel into the hands of the driver figure.Then, place the figure back into the vehicle along with the steering wheel.Scope of Delivery: 1x hand-painted driver figure in the shown pose (Unimog not included – photo is for illustrative purposes).
Tieflader-Sattelauflieger Dreiachser für Scania 1:18 rot
Der Tieflader-Sattelauflieger Dreiachser ist die ideale Ergänzung zur Scania 770S Zugmaschine im Maßstab 1:18. Der Auflieger lässt sich direkt mit der Fernsteuerung des Fahrzeugs bedienen und ermöglicht so ein realistisches und komfortables Zusammenspiel zwischen Zugmaschine und Trailer. Dank der elektronisch steuerbaren Rampen und Stützen können diese präzise auf- und abgefahren werden, was das Be- und Entladen sowie das An- und Abkoppeln besonders einfach macht. Eine integrierte LED-Beleuchtung sorgt zusätzlich für eine authentische Atmosphäre – besonders eindrucksvoll bei Fahrten in gedämpftem Licht. Der Sattelauflieger wird als teilmontierter Bausatz geliefert und ist mit wenigen Handgriffen montagefertig. Mit seiner robusten Konstruktion überzeugt er durch einen verstärkten Metallrahmen und eine hohe Tragkraft von bis zu 7,5 Kilogramm. Die drei Achsen gewährleisten eine gleichmäßige Lastverteilung und stabile Fahreigenschaften, während die Gummibereifung für guten Grip und realistische Optik sorgt. Damit bietet der Dreiachser-Tieflader nicht nur ein detailgetreues Erscheinungsbild, sondern auch eine hohe Funktionalität und Langlebigkeit. Highlights: Passender Sattelauflieger für die AMEWI Scania 770S Zugmaschine 1:18 rot: Kompatibel mit der Fernsteuerung des Fahrzeugs Rampen und Stützen elektronisch bedienbar: Lassen sich jeweils hoch und runterfahren LED-Beleuchtung: Noch mehr Atmosphäre beim Einsatz, insbesondere bei gedämmtem Umgebungslicht Weitere Features: Sattelauflieger kommt als teilmontierter Bausatz aus der Box und ist nach nur wenigen Handgriffen zur Montage direkt einsatzbereit Mit der Fernsteuerung der Zugmaschine steuerbar Hohe Tragkraft von bis zu 7,5kg dank drei Achsen Verstärkter Rahmen aus Metall Gummibereifung Technische Daten: Maßstab: 1:18 Länge: 735mm (aufgebaut) Breite: 143mm Höhe: 107mm (204mm mit hochgeklappten Rampen) Gewicht: 1188g Hauptmaterial: Kunststoff Bodenfreiheit: 20mm Vorderräder: Außendurchmesser/Breite 55/22mm Hinterräder: Außendurchmesser/Breite 55/22mm Felgendurchmesser: 33mm Akkufach Abmessungen: 53x25x16mm Akku: Li-Ion 1S 3,7V 500mAh 10C JST/BEC-Anschluss, 50x14x14mm, 19g Ersatzakku: Artikel-Nr. 28320 Ladegerät: USB-Ladekabel Ladezeit: ca. 60-90 Minuten Lieferumfang: Sattelauflieger-Bausatz, teilmontiert Akku Ladekabel Werkzeug Anleitung DE/EN Benötigtes Zubehör: Scania Zugmaschine 1:18 inkl. Fernsteuerung
Low loader semi-trailer, three-axle, for Scania, 1:18, silver
The three-axle low loader semi-trailer is the ideal complement to the Scania 770S tractor unit in 1:18 scale. The trailer can be operated directly with the vehicle's remote control, enabling realistic and convenient interaction between the tractor unit and trailer. Thanks to the electronically controlled ramps and supports, these can be raised and lowered with precision, making loading, unloading, coupling and uncoupling particularly easy. Integrated LED lighting also creates an authentic atmosphere – particularly impressive when driving in dim light.The semi-trailer is delivered as a partially assembled kit and can be assembled in just a few simple steps. With its robust construction, it impresses with a reinforced metal frame and a high load capacity of up to 7.5 kilograms. The three axles ensure even load distribution and stable driving characteristics, while the rubber tyres provide good grip and a realistic look. The three-axle low loader not only offers a detailed appearance, but also high functionality and durability.Highlights:Matching semi-trailer for the AMEWI Scania 770S tractor unit 1:18 red: Compatible with the vehicle's remote controlRamps and supports can be operated electronically: can be raised and loweredLED lighting: creates even more atmosphere during use, especially in dim ambient lightAdditional featuresSemi-trailer comes out of the box as a partially assembled kit and is ready for use after just a few simple assembly stepsCan be controlled with the tractor unit's remote controlHigh load capacity of up to 7.5 kg thanks to three axlesReinforced metal frameRubber tyresTechnical data:Scale: 1:18Length: 735 mm (assembled)Width: 143 mmHeight: 107 mm (204 mm with ramps raised)Weight: 1188 gMain material: plasticGround clearance: 20 mmFront wheels: outer diameter/width 55/22 mmRear wheels: outer diameter/width 55/22 mmRim diameter: 33 mmBattery compartment dimensions: 53 x 25 x 16 mmBattery: Li-ion 1S 3.7V 500mAh 10C JST/BEC connection, 50 x 14 x 14 mm, 19 gReplacement battery: Item no. 28320Charger: USB charging cableCharging time: approx. 60-90 minutesScope of deliverySaddle trailer kit, partially assembledBatteryCharging cableToolsInstructions DE/ENRequired accessoriesScania tractor unit 1:18 incl. remote control
Electronic quick change system for excavators 1:14 CNC aluminum
Electronic quick change system for excavators 1:14 CNC aluminum Electronic quick-change system makes it easy to change the shovels for the excavators on a scale of 1:14. No more screws required, the systems can now be exchanged at lightning speed at the push of a button. The quick coupler fits the following AMEWI models 22307 22308 22309 22344 22403 22415. CNC-milled aluminum black anodized. scope of delivery
RC Excavator with Metal Bucket, Light & Sound, 1/14 RTR
RC Excavator with Metal Bucket, Light & Sound, 1/14 RTR Hydraulic excavators with backhoes (buckets) are in use on many construction sites around the world - they are used to dig excavation pits and move soil. This 1:14 scale replica, suitable for children aged 6 years and over, brings real playtime fun to the children's room or garden at home thanks to its numerous functions. The metal shovel also allows for more demanding work. It is also more durable. Tower rotation and upper carriage rotation, raising and lowering the grab arm, opening and closing the backhoe bucket: With this model, you can emulate the real excavator drivers. Thanks to the chain drive and rubber tracks, it has excellent grip on any surface. Manufactured in eye-catching yellow, good visibility is guaranteed. The sound and lights are also impressive, for even more realistic playing fun. The excavator is controlled using a modern 2.4 GHz transmitter, on which all the excavator's functions are already preprogrammed, and is child's play to operate. Thanks to the integrated demo mode, the model can demonstrate the functions independently if required. Delivered as an RTR version (Ready-to-Run), all components - apart from standard household batteries for the remote control - are already included in the package and the excavator can be put into operation immediately after charging the battery. Highlights: Metal bucket: Thanks to the robust backhoe bucket, even the most demanding jobs are a success Auto-demonstration: All functions are demonstrated at the touch of a button Light & sound: Enables even more realistic playing fun Further features: RTR version (Ready-to-Run) incl. remote control, battery, charging cable Interference-free 2.4GHz system Rubber tracks for a high level of grip Sound can also be switched off via transmitter Long operating time of up to 25 minutes Technical data: Scale: 1:14 Length: 540mm Width: 170mm Height: 450mm Weight (incl. battery): 1640g Main material: Plastic Blade: Metal Battery: Li-Ion 2S 7.4V 500mAh, HBX plug 4-pin, 50x28x15mm, 38g Operating time: 20-25min, depending on use Remote control: 2.4GHz Range: 40m Charging cable: USB Charging time: 60min Scope of delivery: Model Remote control Charging cable Rechargeable battery Operating instructions DE/EN Required accessories: 2x 1.5V AA batteries for the remote control
MESSEMUSTER - Scania 770 S Zugmaschine 6x4 1:18 RTR rot
MESSEMUSTER 2026 Intermodellbau Dortmund Ausstellermodell, wurde nur ausgepackt und zu Ansicht ausgestellt, nicht gefahrenDer lizenzierte Nachbau des Scania 770 überzeugt mit beeindruckender Technik, realistischer Optik und durchdachten Funktionen – ideal für Modellbau-Enthusiasten und Truck-Fans des kleineren Maßstabs. Dank proportionaler Fahrfunktionen lässt sich das Fahrzeug präzise und feinfühlig in alle Richtungen manövrieren. Der kraftvolle 4WD-Antrieb in Kombination mit griffiger Gummibereifung sorgt für optimale Traktion – selbst beim Ziehen eines Anhängers. Für ein authentisches Fahrerlebnis ist die realistische LED-Beleuchtung direkt über die Fernsteuerung schaltbar. Ein besonderes Highlight ist die fernbedienbare Sattelkupplung, die das Öffnen und Schließen per Knopfdruck ermöglicht. Die hochwertige Metallic-Lackierung und das detailgetreue Interieur unterstreichen den hochwertigen Scale-Look des offiziell lizenzierten Scania-Modells. Zusätzlich lassen sich über die Fernsteuerung realistische Fahrgeräusche und weitere Funktionen für den Betrieb eines optionalen Anhängers aktivieren. Ein leistungsstarker 1200mAh Li-Ion Akku sorgt für lange Fahrzeiten von bis zu 20 Minuten – je nach Fahrweise. Alles für den Betrieb erforderliche Zubehör ist bereits im Lieferumfang enthalten, lediglich vier 1,5V AA-Batterien für die Fernsteuerung werden noch benötigt. Highlights: Proportionale Fahrfunktionen: Zielgenaues, feinfühliges Manövrieren in alle Richtungen 4WD-Antrieb mit Gummibereifung: Für ausreichend Traktion, um beispielsweise auch einen Anhänger zu bewegen Realistische Beleuchtung: Über die Fernsteuerung schaltbar für die richtige Fahratmosphäre Weitere Features: Sattelkupplung (Öffnen und Schließen) über die Fernsteuerung bedienbar Lackierung in Metallic-Optik Detailgetreues Interieur Lizenziertes Scale-Fahrzeug von Scania Schaltbare Zusatzfunktionen an der Fernsteuerung für einen optionalen Anhänger Lange Fahrzeiten dank großem Li-Ion Akku mit 1200mAh von bis zu 20 Minuten, je nach Fahrweise Stoßdämpfer an der Vorderachse Realistische Fahrgeräusche Technische Daten: Maßstab: 1:18 Länge: 385mm Breite: 140mm Höhe: 220mm Gewicht: 1621g ohne Akku Radstand 1: 265mm (Achse 1 – Achse 3) Radstand 2: 185mm (Achse 1 – Achse 2) Spurbreite vorne: 122mm Spurbreite hinten: 115mm Bodenfreiheit: 10mm Vorderräder: Außendurchmesser/Breite 53/16mm Hinterräder: Außendurchmesser/Breite 53/20mm Felgendurchmesser: 30mm Getriebe: Kunststoff Bremse: elektronisch Regler: Brushed Motor: Brushed Lenkservo: Mini Hauptmaterial: ABS-Kunststoff Akkufach Abmessungen: 68x42x23mm Akku: Li-Ion 2S 7,4V 1200mAh 15C 18650 HBX 4-Polig, 68x35x16mm, 77g Fahrzeit: ca. 20-25 Minuten je nach Fahrweise Höchstgeschwindigkeit: ca. 7-10 km/h Fernsteuerung: 2,4GHz, 12-Kanal Reichweite: ca. 50 Meter Ladegerät: USB Ladezeit: ca. 60-90 Minuten Lieferumfang: Modell Fernsteuerung Akku Ladekabel Werkzeug Anleitung DE/EN Benötigtes Zubehör: 4x AA Mignon Batterien für die Fernsteuerung
Scania 770 S Zugmaschine 6x4 1:18 RTR rot
Der lizenzierte Nachbau des Scania 770 überzeugt mit beeindruckender Technik, realistischer Optik und durchdachten Funktionen – ideal für Modellbau-Enthusiasten und Truck-Fans des kleineren Maßstabs. Dank proportionaler Fahrfunktionen lässt sich das Fahrzeug präzise und feinfühlig in alle Richtungen manövrieren. Der kraftvolle 4WD-Antrieb in Kombination mit griffiger Gummibereifung sorgt für optimale Traktion – selbst beim Ziehen eines Anhängers. Für ein authentisches Fahrerlebnis ist die realistische LED-Beleuchtung direkt über die Fernsteuerung schaltbar. Ein besonderes Highlight ist die fernbedienbare Sattelkupplung, die das Öffnen und Schließen per Knopfdruck ermöglicht. Die hochwertige Metallic-Lackierung und das detailgetreue Interieur unterstreichen den hochwertigen Scale-Look des offiziell lizenzierten Scania-Modells. Zusätzlich lassen sich über die Fernsteuerung realistische Fahrgeräusche und weitere Funktionen für den Betrieb eines optionalen Anhängers aktivieren. Ein leistungsstarker 1200mAh Li-Ion Akku sorgt für lange Fahrzeiten von bis zu 20 Minuten – je nach Fahrweise. Alles für den Betrieb erforderliche Zubehör ist bereits im Lieferumfang enthalten, lediglich vier 1,5V AA-Batterien für die Fernsteuerung werden noch benötigt. Highlights: Proportionale Fahrfunktionen: Zielgenaues, feinfühliges Manövrieren in alle Richtungen 4WD-Antrieb mit Gummibereifung: Für ausreichend Traktion, um beispielsweise auch einen Anhänger zu bewegen Realistische Beleuchtung: Über die Fernsteuerung schaltbar für die richtige Fahratmosphäre Weitere Features: Sattelkupplung (Öffnen und Schließen) über die Fernsteuerung bedienbar Lackierung in Metallic-Optik Detailgetreues Interieur Lizenziertes Scale-Fahrzeug von Scania Schaltbare Zusatzfunktionen an der Fernsteuerung für einen optionalen Anhänger Lange Fahrzeiten dank großem Li-Ion Akku mit 1200mAh von bis zu 20 Minuten, je nach Fahrweise Stoßdämpfer an der Vorderachse Realistische Fahrgeräusche Technische Daten: Maßstab: 1:18 Länge: 385mm Breite: 140mm Höhe: 220mm Gewicht: 1621g ohne Akku Radstand 1: 265mm (Achse 1 – Achse 3) Radstand 2: 185mm (Achse 1 – Achse 2) Spurbreite vorne: 122mm Spurbreite hinten: 115mm Bodenfreiheit: 10mm Vorderräder: Außendurchmesser/Breite 53/16mm Hinterräder: Außendurchmesser/Breite 53/20mm Felgendurchmesser: 30mm Getriebe: Kunststoff Bremse: elektronisch Regler: Brushed Motor: Brushed Lenkservo: Mini Hauptmaterial: ABS-Kunststoff Akkufach Abmessungen: 68x42x23mm Akku: Li-Ion 2S 7,4V 1200mAh 15C 18650 HBX 4-Polig, 68x35x16mm, 77g Fahrzeit: ca. 20-25 Minuten je nach Fahrweise Höchstgeschwindigkeit: ca. 7-10 km/h Fernsteuerung: 2,4GHz, 12-Kanal Reichweite: ca. 50 Meter Ladegerät: USB Ladezeit: ca. 60-90 Minuten Lieferumfang: Modell Fernsteuerung Akku Ladekabel Werkzeug Anleitung DE/EN Benötigtes Zubehör: 4x AA Mignon Batterien für die Fernsteuerung
Scania 770 S Truck unit 6x4 1:18 RTR silver
The licensed replica of the Scania 770 impresses with its impressive technology, realistic appearance and well-designed features – ideal for model building enthusiasts and truck fans on a smaller scale. Thanks to proportional driving functions, the vehicle can be manoeuvred precisely and sensitively in all directions. The powerful 4WD drive in combination with grippy rubber tyres ensures optimum traction – even when pulling a trailer. For an authentic driving experience, the realistic LED lighting can be switched on and off directly via the remote control.A special highlight is the remote-controlled fifth wheel coupling, which can be opened and closed at the touch of a button. The high-quality metallic paintwork and detailed interior underline the high-quality scale look of the officially licensed Scania model. In addition, realistic driving sounds and other functions for operating an optional trailer can be activated via the remote control. A powerful 1200mAh Li-Ion battery ensures long driving times of up to 20 minutes, depending on driving style.All accessories required for operation are included in the scope of delivery; only four 1.5V AA batteries for the remote control are still required.Highlights:Proportional driving functions: Precise, sensitive manoeuvring in all directions4WD drive with rubber tyres: For sufficient traction to move a trailer, for exampleRealistic lighting: Can be switched on and off via the remote control for the right driving atmosphereAdditional features:Saddle coupling (opening and closing) can be operated via the remote controlMetallic paint finishDetailed interiorLicensed scale model vehicle from ScaniaSwitchable additional functions on the remote control for an optional trailerLong driving times of up to 20 minutes thanks to a large 1200 mAh Li-ion battery, depending on driving styleShock absorbers on the front axleRealistic driving soundsTechnical data:Scale: 1:18Length: 385 mmWidth: 140 mmHeight: 220 mmWeight: 1621 g without batteryWheelbase 1: 265 mm (axle 1 – axle 3)Wheelbase 2: 185 mm (axle 1 – axle 2)Front track width: 122 mmRear track width: 115 mmGround clearance: 10 mmFront wheels: Outer diameter/width 53/16 mmRear wheels: Outer diameter/width 53/20 mmRim diameter: 30 mmGearbox: PlasticBrake: ElectronicController: BrushedMotor: BrushedSteering servo: MiniMain material: ABS plasticBattery compartment dimensions: 68 x 42 x 23 mmBattery: Li-ion 2S 7.4V 1200mAh 15C 18650 HBX 4-pin, 68x35x16mm, 77gDriving time: approx. 20-25 minutes depending on driving styleMaximum speed: approx. 7-10 km/hRemote control: 2.4GHz, 12-channelRange: approx. 50 metresCharger: USBCharging time: approx. 60-90 minutesScope of delivery:ModelRemote controlBatteryCharging cableToolsInstructions DE/ENRequired accessories:4x AA batteries for the remote control
Scania 770 S Truck unit 6x4 1:18 RTR green
The licensed replica of the Scania 770 impresses with its impressive technology, realistic appearance and well-designed features – ideal for model building enthusiasts and truck fans on a smaller scale. Thanks to proportional driving functions, the vehicle can be manoeuvred precisely and sensitively in all directions. The powerful 4WD drive in combination with grippy rubber tyres ensures optimum traction – even when pulling a trailer. For an authentic driving experience, the realistic LED lighting can be switched on and off directly via the remote control.A special highlight is the remote-controlled fifth wheel coupling, which can be opened and closed at the touch of a button. The high-quality metallic paintwork and detailed interior underline the high-quality scale look of the officially licensed Scania model. In addition, realistic driving sounds and other functions for operating an optional trailer can be activated via the remote control. A powerful 1200mAh Li-Ion battery ensures long driving times of up to 20 minutes, depending on driving style.All accessories required for operation are included in the scope of delivery; only four 1.5V AA batteries for the remote control are still required.Highlights:Proportional driving functions: Precise, sensitive manoeuvring in all directions4WD drive with rubber tyres: For sufficient traction to move a trailer, for exampleRealistic lighting: Can be switched on and off via the remote control for the right driving atmosphereAdditional features:Saddle coupling (opening and closing) can be operated via the remote controlMetallic paint finishDetailed interiorLicensed scale model vehicle from ScaniaSwitchable additional functions on the remote control for an optional trailerLong driving times of up to 20 minutes thanks to a large 1200 mAh Li-ion battery, depending on driving styleShock absorbers on the front axleRealistic driving soundsTechnical data:Scale: 1:18Length: 385 mmWidth: 140 mmHeight: 220 mmWeight: 1621 g without batteryWheelbase 1: 265 mm (axle 1 – axle 3)Wheelbase 2: 185 mm (axle 1 – axle 2)Front track width: 122 mmRear track width: 115 mmGround clearance: 10 mmFront wheels: Outer diameter/width 53/16 mmRear wheels: Outer diameter/width 53/20 mmRim diameter: 30 mmGearbox: PlasticBrake: ElectronicController: BrushedMotor: BrushedSteering servo: MiniMain material: ABS plasticBattery compartment dimensions: 68 x 42 x 23 mmBattery: Li-ion 2S 7.4V 1200mAh 15C 18650 HBX 4-pin, 68x35x16mm, 77gDriving time: approx. 20-25 minutes depending on driving styleMaximum speed: approx. 7-10 km/hRemote control: 2.4GHz, 12-channelRange: approx. 50 metresCharger: USBCharging time: approx. 60-90 minutesScope of delivery:ModelRemote controlBatteryCharging cableToolsInstructions DE/ENRequired accessories:4x AA batteries for the remote control
RC ACV730 Crawler Excavator 1/14 RTR anthracite/yellow
RC ACV730 Crawler Excavator 1/14 RTR anthracite/yellow This detailed replica of a heavy-duty tracked excavator impresses with its high-quality workmanship and realistic functions. With true-to-the-original Euro controls, the joysticks of which are assigned as on a real excavator, the model can be controlled precisely and intuitively. The reliable 2.4 GHz system ensures interference-free signal transmission with a range of up to 40 metres. The robust metal shovel and powerful servomotors enable heavy objects to be lifted, while the individually controllable tracks ensure flexible locomotion. Thanks to its integrated splash protection, the excavator is fully suitable for outdoor use. A special highlight is the realistic simulation of real excavator movements, including a 360° tower rotation. With a total of 22 functions, realistic light and sound effects, and a maximum speed of about 5 km/h, this model offers an authentic construction site experience. The gear parts in the arms are equipped with an overload protection function that ensures a long service life. The powerful 7.4V lithium-ion rechargeable battery with 1200mAh provides a driving time of about 20 minutes and can be conveniently charged via a USB cable. With its dimensions of approx. 46 x 20 x 17 cm and a scale of 1:14, this tracked excavator is an impressive model for excavator fans and technology enthusiasts. Its realistic design and well-thought-out functions make it a highlight for anyone looking for a powerful and detailed model. Features: 22 functions Metal shovel Dimensions: approx. 46 x 20 x 17 cm Scale 1:14 Weight of excavator incl. rechargeable battery: 2.33 kg 2.4 GHz Euro control, approx. 40 m range Simulation of real functions 360° tower rotation Light and sound (realistic) Maximum speed of approx. 15 km/h Charging via USB cable 7.4V Li-Ion, 1200mAH JST-BEC plug Up to 20 minutes of driving time Scope of delivery: Model Remote control USB charging cable Rechargeable battery Operating instructions in DE/EN Required accessories: 3x 1.5V AA batteries for the remote control
RC ACV730 V2 Crawler Excavator 1/14 RTR
RC ACV730 V2 Crawler Excavator 1/14 RTR The proven and popular Amewi ACV730 excavator in the V2 version: Main arm now with metal gearbox. More powerful than the predecessor and now also equipped with overload protection gears. Amewi Exclusive Edition in noble colour design (dark grey / white). Elaborate and high-quality replica of a heavy track excavator. High level of detail and material quality. With a real Euro control (stick occupied as in the real excavator) with interference-free 2.4GHz system. Robust metal bucket. Powerful servomotors make it possible to lift even heavy objects. In addition, all gear parts in the arms are equipped with an "overload protection function". The chains can be controlled individually and the model is fully suitable for outdoor use thanks to the splash water protection. Features: 22 functions Metal shovel Main arm with metal gear More powerful than its predecessor dimensions: approx. 46 x 20 x 17 cm Scale 1:14 Weight of the excavator incl. battery: 2430g 2.4GHz Euro control, approx. 80m range Simulation of real functions 360° tower rotation Light and sound (realistic) Max. speed up to approx. 5 km/h Charging via USB cable Scale 1:14 7,4V Li-Ion,1200mAH JST-BEC connector (approx. 20 min. driving time) Scope of delivery: Crawler excavator Remote control USB charging cable 1200mAH Li-Ion battery Operating instructions DE/EN Required accessories: 3x 1.5V AA AA batteries
RC truck Mercedes-Benz Arocs license truck tipper 2.4GHz RTR red
RC truck Mercedes-Benz Arocs license truck tipper 2.4GHz RTR red Great original Mercedes-Benz scale model of an Arocs tipper. Arocs is the name of the famous Mercedes-Benz truck series from Daimler AG. The Arocs construction site vehicles were first presented in 2013 and have since been found on many construction sites around the world. They are characterized by high performance, reliability and robustness. With this licensed model, almost all functions can be controlled as with its big brother, making the hearts of scaler fans beat faster. The model has a 4WD drive and an encapsulated gearbox, which means that it is protected from splash water and is therefore suitable for off-road use. The structure and paintwork of this high-quality model correspond to the original, which makes this model special in terms of design and presentation. The model is delivered RTR (ready to run) and the scope of delivery includes everything that is required for operation. (except the batteries for the transmitter) Features Original licensed Mercedes-Benz model, 10 channels controllable 2.4GHz system (fail-safe) Functions: forwards / backwards / right left, sound on / off, light, trough can be controlled separately long driving time (up to 20 min.) Battery included (Ni-MH 7.2V 400mAh) Charger included Transmitter included True-to-original simulation of all functions Technical specifications: Length: 422mm Width: 152mm Height: 181mm Weight: 2600g Driving time up to 20 minutes (depending on driving style) Charging time approx. 1.5 hours Range: approx. 30m USB charging cable Battery: 7.2V 400mAh Ni-Mh BEC connector Scope of delivery: Arocs tipper model 2.4Ghz transmitter Battery 7.2V 400mAh Ni-Mh USB charger Instructions: Deu / Eng / Ita / Fra Required accessories 4x AA Mignon battery for transmitter 1.5V suitable from 8 years
RC Mercedes-Benz Arocs Licence Dump Truck 2,4GHz blue
RC Mercedes-Benz Arocs Licence Dump Truck 2,4GHz blue Arocs is the name of the famous truck series of the Mercedes-Benz brand of Daimler AG. The Arocs construction site vehicles were first introduced in 2013 and have since been found on many construction sites worldwide. They are characterised by high performance, reliability and robustness. With this licensed model, almost all functions can be controlled as with its big brother, making the hearts of scaler fans beat faster. The model has a 4WD drive and an encapsulated gearbox. It is therefore protected against splash water and is also suitable for off-road use. The body and the paint of this high-quality model correspond to the original, which makes this model special in design and presentation. The model is delivered RTR (ready to run) and the scope of delivery includes everything required for operation. (except the batteries for the transmitter). Features: Exclusive Amewi Edition of the Mercedes Benz Arocs dump truck in blue. LED lighting 10 controllable channels 2,4Ghz system (interference free) Functions forward / backward / right left, sound on / off, light, dump body separately controllable Long driving time (up to 20 min.) Battery included (NiMH 7,2V 400mAh) Charger included Transmitter included True to original simulation of all functions Technical data: Scale: 1:14 Length: 422mm Width: 152mm Height: 181mm Weight: 3600g incl. battery Wheelbase: 255mm Front track width: 120mm Rear track width: 120mm Ground clearance: 17mm Main material: Plastic Battery compartment dimensions: Battery: NiMH 6 cells 7.2V 400mAh Softcase Plug, LxWxH, Weight Driving time: approx. 20min Maximum speed: approx. 5km/h Remote control: 10 channel 2,4GHz Range: approx. 80m Charger: USB charging cable Charging time: approx. 1.5h Scope of delivery: Model, assembled ready to run Remote control Battery USB charger Manual DE/EN/FR/IT Required accessories: 4x AA Mignon batteries 1.5V for the remote control
RC Mercedes-Benz Arocs fire brigade turntable ladder vehicle 1:18 RTR
RC Mercedes-Benz Arocs fire brigade turntable ladder vehicle 1:18 RTR Exclusive license model of a Mercedes AROCS ladder vehicle for the German fire brigade. 1:18 scale. This beautiful replica impresses with its attention to detail, the fully proportional driving functions, the classic siren sound and the bright LED lighting. Other functions such as rotating ladder with height adjustment, splash water function (range approx. 2m) or light, sound and trimming of the steering are easy to operate using the 2.4GHz transmitter in elegant black / red with aluminum sticks. The range of the transmitter / model is approx. 30-50m. The lettering is completely in German and the model bears the original Mercedes Benz logo (worldwide exclusive license for Amewi). All add-on parts and applications correspond to the original vehicle. The delivery takes place in a high-quality black cardboard box with Mercedes imprint and hologram with serial number of Daimler AG. The powerful 2WD rear-wheel drive with the rubber tires ensures sufficient traction to get to difficult places. The supplied 1200mAh Li-Ion battery ensures a driving time of approx. 10-15 minutes, depending on the surface and feature use. The battery is exchangeable and with optional replacement batteries a long game of fun is guaranteed. A USB cable is included with the set to charge the battery. Features: Very high level of detail Official Mercedes exclusive license Lettering as well as light and sound correspond to the German original Turntable ladder up / down, left / right, water syringe 2.4GHz system with 12 controllable channels High quality transmitter with aluminum sticks Detailed driver's cab with sight glass Large battery (1200mAh Li-Ion 7.4V) Fully proportional controllable (all functions) Technical specifications: Length: 580mm Width: 150mm Height: 240mm Height with extended ladder: 580mm Weight: 2464g including battery System: 2.4GHz / 12 channel Drive: 2WD rear-wheel drive / profiled rubber wheels Battery: Li-Ion 7.4V 1200mAh BEC connection Dimensions battery: 70 x 36.5 x 18.5mm Weight battery: 77g Charger: USB charging cable balancer 0.8A output Scope of delivery: Model fire engine with turntable ladder 2.4GHz transmitter Battery Li-Ion 7.4V 1200mAh USB charging cable Transmitter stick aluminum screwdriver Instructions De / Eng / Fr / I Required accessories: 4x AA Mignon 1.5V batteries